We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small copper cutting tip with threaded base and single central orifice

Victor

Victor 6700-2442 Cutting Tip 3-101-2 Acetylene

SKU CH-Z4W8-7Z2VJ

Acetylene cutting tip for handheld and machine torches, cuts 1 to 1 1/2 in steel at up to 19 in/min with 10 to 18 scfh fuel flow and .09 in kerf

  • TypeWelding Parts & Supplies
  • Cuts steel 1 in to 1 1/2 in thick with tip size 2
  • Light-to-medium preheat flame runs at 10 to 18 scfh acetylene flow
  • Copper one-piece tip delivers 19 in/min max cutting speed
  • 09 in kerf width for clean, narrow cuts
  • Fits CA 1260, CA 1350, CA 1351, CA 1352, CA 24709, CA 411-3 attachments

Victor 6700-2442 Cutting Tip 3-101-2

The Victor 6700-2442 is a one-piece copper cutting tip sized 2 in the 3-101 series. It is built for steel cutting with acetylene fuel on handheld or machine torches. The tip produces a light to medium preheat flame suitable for material between 1 in and 1 1/2 in thick. It fits Victor torches using compatible cutting attachments.

Check torch and attachment compatibility

Verify that your torch uses the 3-101 tip series before ordering. Confirm the cutting attachment is one of the listed compatible models: CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 or CA 411-3. Ensure your fuel supply is acetylene and that your regulator can deliver between 10 and 18 scfh. This tip will not fit torches or attachments outside the specified series.

Thermals noise and power in normal use

The copper body conducts heat efficiently during extended cuts up to 19 in/min. A light to medium preheat flame keeps thermal load moderate on the tip face. Acetylene flow of 10 to 18 scfh produces a steady hiss without excessive turbulence. Kerf width of 0.09 in indicates focused energy transfer with minimal wasted heat. No electrical power is drawn by the tip itself.

Highlights

  • Cuts steel 1 in to 1 1/2 in thick with tip size 2
  • Light-to-medium preheat flame runs at 10 to 18 scfh acetylene flow
  • Copper one-piece tip delivers 19 in/min max cutting speed
  • 09 in kerf width for clean, narrow cuts
  • Fits CA 1260, CA 1350, CA 1351, CA 1352, CA 24709, CA 411-3 attachments

Specifications

BrandFIREPOWER
TypeWelding Parts & Supplies

Questions about this item

Does the 6700-2442 cutting tip include the CA 1260 attachment or must it be purchased separately?

The tip is a one-piece copper design compatible with CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 and CA 411-3 attachments, which are sold separately.

How do I choose between tip sizes when the spec sheet only lists size 2 for the 3-101 series?

Size 2 is the designated tip for the 3-101 series and handles steel from 1 in to 1 1/2 in thick with a light to medium preheat flame.

What does the 19 in/min maximum cutting speed mean in practice on 1 1/2 in steel?

At the top end of the 10 to 18 scfh acetylene range the tip can achieve 19 in/min on 1 1/2 in plate, producing a 0.09 in kerf.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.