We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small copper cutting tip with tapered end for acetylene torch

Victor

Victor 6700-2440 Cutting Tip 3-101-0 Acetylene

SKU CH-2YFB-YNF6Y

Copper cutting tip for acetylene torches, fits Victor CA series attachments and cuts steel 3/8 to 1/2 inch thick at up to 28 in/min

  • TypeWelding Parts & Supplies
  • Cuts steel 3/8 to 1/2 in thick with acetylene fuel
  • One-piece copper tip delivers light to medium preheat flame
  • Compatible with Victor CA 1260, 1350, 1351, 1352, 24709, 411-3 attachments
  • Fuel flow 6 to 10 scfh for efficient cutting speed
  • Maximum cutting speed 28 in/min with 0.06 in kerf width

Victor 6700-2440 Acetylene Cutting Tip

The Victor 6700-2440 is a one-piece copper cutting tip designed for acetylene fuel. It fits handheld and machine torches using the 3-101 series. The tip cuts steel from 3/8 in to 1/2 in thick with a light to medium preheat flame. Compatible attachments include CA 1260, CA 1350, CA 1351, CA 1352, CA 24709, and CA 411-3.

Practical limits of the 3-101 acetylene interface

This tip operates at an acetylene flow rate of 6 to 10 scfh. Maximum cutting speed reaches 28 in/min while producing a kerf width of 0.06 in. The tip size 0 design restricts use to the stated thickness range of 3/8 in to 1/2 in steel. It will not perform correctly outside these fuel flow and material thickness parameters.

Tip size 0 determines the cutting window

Tip size 0 fixes the minimum at 3/8 in and maximum at 1/2 in cutting thickness for steel. Buyers needing to cut thinner or thicker material must select a different tip size within the 3-101 series. This single specification decides whether the 6700-2440 matches the job.

Highlights

  • Cuts steel 3/8 to 1/2 in thick with acetylene fuel
  • One-piece copper tip delivers light to medium preheat flame
  • Compatible with Victor CA 1260, 1350, 1351, 1352, 24709, 411-3 attachments
  • Fuel flow 6 to 10 scfh for efficient cutting speed
  • Maximum cutting speed 28 in/min with 0.06 in kerf width

Specifications

TypeWelding Parts & Supplies
BrandFIREPOWER

Questions about this item

Which tip size in the 3-101 series fits my cutting thickness?

Tip size 0 covers 3/8 in to 1/2 in steel with a light-to-medium preheat flame.

What does the 28 in/min maximum cutting speed mean on the job?

It is the top speed this tip can sustain on 3/8–1/2 in steel when oxygen and acetylene pressures are set correctly.

Which cutting attachments accept the 3-101-0 tip?

It fits Victor CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 and CA 411-3 attachments.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.