We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small copper cutting tip with a pointed conical end

Victor

Victor 6700-2439 Cutting Tip 3-101-00 Acetylene

SKU CH-7Q6F-AJKRG

Acetylene cutting tip for handheld or machine torches, one-piece copper design cuts steel up to 1/4 in thick at 27–30 in/min with a 0.05 in kerf

  • TypeWelding Parts & Supplies
  • Cuts steel up to 1/4 in thick with 0.05 in kerf
  • Works with acetylene at 4 to 6 scfh fuel flow
  • One-piece copper tip handles light to medium preheat flames
  • Fits Victor CA 1260, 1350, 1351, 1352, 24709, 411-3 attachments
  • Cuts at 27 to 30 in/min for efficient steel work

Acetylene Cutting Tip 3-101-00

This Victor-compatible cutting tip is designed for handheld and machine torches using acetylene fuel. It serves fabricators and maintenance crews cutting mild steel up to one-quarter inch thick with a light to medium preheat flame.

Practical limits of the 3-101 series

The one-piece copper tip operates within a fuel flow range of 4 to 6 standard cubic feet per hour and delivers cutting speeds between 27 and 30 inches per minute. It fits CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 and CA 411-3 cutting attachments only.

Capacity and headroom

The tip cleanly handles steel plate up to 1/4 in thickness and produces a kerf width of 0.05 in. It is not suited for heavier plate, high-speed mechanised cutting beyond 30 in/min or alternative fuel gases such as propane or propylene.

Highlights

  • Cuts steel up to 1/4 in thick with 0.05 in kerf
  • Works with acetylene at 4 to 6 scfh fuel flow
  • One-piece copper tip handles light to medium preheat flames
  • Fits Victor CA 1260, 1350, 1351, 1352, 24709, 411-3 attachments
  • Cuts at 27 to 30 in/min for efficient steel work

Specifications

TypeWelding Parts & Supplies
BrandFIREPOWER

Questions about this item

Which tip size should I choose for 1/4 in steel?

Tip size 00 is rated for a maximum cutting thickness of 1/4 in, so it matches that job exactly.

What does the 30 in/min maximum cutting speed mean on the bench?

It is the top speed this tip can sustain on 1/4 in steel with the correct acetylene flow and preheat setting.

What fuel flow does the 3-101 series require?

The tip runs at 4 to 6 scfh of acetylene when paired with a compatible CA attachment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.