We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass acetylene cutting tip with threaded base

Victor

Victor 6700-2409 Cutting Tip 1-101-00 Acetylene

SKU CH-PD0D-4DG8H

Acetylene cutting tip size 00 for Victor torches, one-piece design cuts steel up to 1/4 in

  • TypeWelding Parts & Supplies
  • Cuts steel up to 1/4 inch using acetylene fuel
  • One-piece tip design for consistent flame performance
  • Fits Victor HC 1200C and MT series torches
  • Works with CA 2460 and CA 2461 cutting attachments
  • Tip size 00 from the 1-101 series for precise cuts

Purpose and fit

The FIREPOWER 6700-2409 is an acetylene cutting tip built for steel work up to one quarter inch thick. It suits fabricators and maintenance crews who run handheld or machine torches from the listed Victor series and need a one-piece tip in the 1-101 range.

Upgrade path

The tip replaces worn or damaged 1-101 size tips on compatible torches and attachments. The jump is worth it when cut quality drops, when the orifice is eroded, or when switching a torch to acetylene fuel for the first time.

Compatibility checklist

Verify that your torch belongs to the HC 1200C, MT 1065, MT 200, MT 300, MT 5, ST 1000FC, ST 2600FC, ST 300FC, ST 400C or ST 900FC series. Confirm the cutting attachment is one of the CA 2460, CA 2460+, CA 2461, CA 2461+, CA 2462, CA 2462+ or CA 411-1 models. Ensure the fuel supply is acetylene and the material thickness does not exceed the rated maximum.

Highlights

  • Cuts steel up to 1/4 inch using acetylene fuel
  • One-piece tip design for consistent flame performance
  • Fits Victor HC 1200C and MT series torches
  • Works with CA 2460 and CA 2461 cutting attachments
  • Tip size 00 from the 1-101 series for precise cuts

Specifications

BrandFIREPOWER
TypeWelding Parts & Supplies

Questions about this item

Which cutting torch series will the 1-101-00 tip fit on?

The tip fits Victor HC 1200C, MT 1065, MT 200, MT 300, MT 5, ST 1000FC, ST 2600FC, ST 300FC, ST 400C and ST 900FC torch series.

How is the one-piece tip installed and what step is often missed?

Thread the tip into the cutting attachment until it seats firmly; the step often missed is tightening it with the correct wrench so the seal holds under acetylene pressure.

When should the 1-101-00 tip be replaced?

Replace the tip when the orifice shows pitting, the pre-heat slots are eroded or the cut edge on 1/4 in steel becomes rough and wide.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.