We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Victor Turbotorch brass torch tip with quick-connect fitting

Victor

Victor 0386-0103 Air/Acetylene Torch Tip

SKU CH-E2EW-700W1

Air/acetylene torch tip with swirl flame and quick-connect fitting for brazing and soldering

  • TypeWelding Parts & Supplies
  • Swirl flame gives even heat distribution
  • Quick-connect fitting speeds up torch changes
  • External lighter ignition works without batteries
  • Handles soft solder from 1 in to 2 in
  • Rated for silver braze between 1/2 in and 1 in

Victor Air/Acetylene Torch Tip A-8

This Victor torch tip connects to a G-4 or PLF-A5 handle using a quick-connect fitting. It produces a swirl flame designed for brazing and soldering tasks. The tip is rated for soft solder from 1 in to 2 in and silver braze from 1/2 in to 1 in. It requires an external lighter for ignition.

Sustained Load Behaviour

The tip operates at a fuel pressure of 14 psig and is built from the Extreme series for durability during extended heating cycles. Consistent pressure maintains the swirl flame pattern without flare-out. The design resists carbon build-up that can choke the orifice over long jobs. Heat output remains stable as long as the supply pressure is held steady.

Setup Checklist

Verify that your torch handle accepts the quick-connect fitting and matches the G-4 or PLF-A5 part numbers. Confirm your regulator can deliver a steady 14 psig fuel supply. Ensure you have an external lighter available, as the tip has no built-in igniter. Check that the joint sizes fall within the 1 in to 2 in soft solder or 1/2 in to 1 in silver braze ranges.

Highlights

  • Swirl flame gives even heat distribution
  • Quick-connect fitting speeds up torch changes
  • External lighter ignition works without batteries
  • Handles soft solder from 1 in to 2 in
  • Rated for silver braze between 1/2 in and 1 in

Specifications

TypeWelding Parts & Supplies
BrandVictor

Questions about this item

How much heat does the 5/16 in tip produce when running on 14 psig air/acetylene all day?

The tip is rated for 14 psig fuel pressure and handles soft solder from 1 in to 2 in and silver braze from 1/2 in to 1 in, so sustained heat output matches those joint sizes.

What torch handle must I already own for the Quick Connect A-8 tip to attach?

It connects to Victor torch handles using part number G-4 or PLF-A5 via the Quick Connect fitting.

Will the Extreme series tip work with my older Victor G-4 handle?

Yes, the tip is listed as compatible with the Victor G-4 handle through its Quick Connect connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.