We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass welding tip with quick-connect fitting

Victor

Victor 0386-0102 Air/Acetylene Welding Tip

SKU CH-DP56-JBH1S

Air/acetylene torch tip with swirl flame and quick-connect fitting for brazing and soldering up to 14 psig

  • TypeWelding Parts & Supplies
  • Swirl flame gives even heat distribution for clean joints
  • Quick-connect fitting lets you change tips without tools
  • External lighter ignition works reliably in windy conditions
  • Handles soft solder from 3/4 in up to 1-1/2 in
  • Silver brazing range covers 1/4 in to 3/4 in pipe

Victor 0386-0102 Tip

The Victor 0386-0102 is an air/acetylene welding tip designed for brazing and soldering tasks. It suits plumbers and HVAC technicians who need a swirl flame for even heat distribution. The tip connects via a quick-connect fitting compatible with G-4 and PLF-A5 torch handles. It is not for users needing propane or MAPP gas fuel types.

Thermals Noise Power

The tip operates at a fuel pressure rating of 14 psig for consistent flame performance. Heat output scales with the torch valve setting and the selected tip size for the job. There are no moving parts or electrical components to generate noise or draw power. Fuel consumption depends entirely on the regulator setting and the duration of use.

Build Connectors Mounting

The tip carries the TURBOTORCH branding and belongs to the Extreme series for professional durability. A quick-connect coupling allows fast tip changes without tools on compatible handles. The 1/4 in tip size handles soft solder from 3/4 in to 1 1/2 in and silver braze from 1/4 in to 3/4 in. It is not for torches lacking the specified quick-connect interface.

Highlights

  • Swirl flame gives even heat distribution for clean joints
  • Quick-connect fitting lets you change tips without tools
  • External lighter ignition works reliably in windy conditions
  • Handles soft solder from 3/4 in up to 1-1/2 in
  • Silver brazing range covers 1/4 in to 3/4 in pipe

Specifications

TypeWelding Parts & Supplies
BrandTURBOTORCH

Questions about this item

How do I install the Victor 0386-0102 tip onto my torch, and what is the common mistake?

Connect the tip using the Quick Connect interface by pushing it firmly onto the compatible G-4 or PLF-A5 torch until it locks; the step often missed is failing to seat it fully, which causes gas leaks.

What maintenance or replacement will the Victor 0386-0102 tip need over time?

The tip orifice can carbonise from the swirl flame; clean it with a tip cleaner after each job and replace the tip when the flame pattern becomes uneven or the soft-solder capacity drops below 3/4 in.

What is the first limit reached during sustained brazing with the Victor 0386-0102 tip?

The 14 psig fuel-pressure rating is the limiting factor; exceeding it causes flame instability and tip overheating before the 3/4 in silver-braze maximum is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.