Victor
Victor 0323-0112 Welding Nozzle Tip Size 0 Drill 65
Welding nozzle tip size 0 with drill size 65 for acetylene torches series 300 handling 5/64 to 1/2 inch welding thickness
- TypeWelding Parts & Supplies
- Welds material up to 1/2 inch thick with Tip Size 0
- Brazes joints up to 1 inch capacity using Drill Size 65
- Fits Victor 300 series torches including part numbers 315FC and 72L11
- Compatible with Grainger torch models 25DV27 25DV28 and 5KJ44
- Designed for acetylene fuel with long cone brazing flame type
Victor 0323-0112 Acetylene Welding Nozzle
The Victor 0323-0112 is a new acetylene welding nozzle tip for torch series 300. It uses the W tip series with a size 0 orifice and drill size 65. This nozzle suits welders and brazers who need a standard long cone flame for general fabrication and repair work.
Practical welding and brazing thickness limits
The nozzle handles welding from a minimum of 5/64 in up to a maximum of 1/2 in material thickness. For brazing it covers a range from 1/4 in minimum to 1 in maximum capacity. These bounds define the practical window where the tip delivers a stable flame without overheating or starving the joint.
Capacity headroom for typical fabrication tasks
Within its stated range the tip comfortably manages light sheet metal up to half-inch plate welding and quarter-inch to one-inch brazing jobs. Outside these limits the flame geometry cannot maintain consistent penetration or heat distribution, so thicker sections or finer detail work would require a different tip size.
Highlights
- Welds material up to 1/2 inch thick with Tip Size 0
- Brazes joints up to 1 inch capacity using Drill Size 65
- Fits Victor 300 series torches including part numbers 315FC and 72L11
- Compatible with Grainger torch models 25DV27 25DV28 and 5KJ44
- Designed for acetylene fuel with long cone brazing flame type
Specifications
| Type | Welding Parts & Supplies |
|---|---|
| Brand | VICTOR |
Questions about this item
Which tip size should I select for the Victor 0323-0112 welding nozzle?
This nozzle is supplied in Tip Size 0 with Drill Size 65 for acetylene use.
What material thickness can this nozzle handle on a torch?
It covers welding from 5/64 in up to 1/2 in and brazing from 1/4 in up to 1 in.
Which torch series does the W tip series fit in practice?
The W tip series is compatible with Torch Series 300 and the listed Victor torch part numbers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213542BTC
In stock