VIAIR
VIAIR 350C 12V 150PSI 1.52 CFM Air Compressor Kit 35030
A 12-volt portable compressor kit delivering 150 PSI maximum working pressure and 1.52 CFM airflow with a 100 percent duty cycle
- TypeAir Compressors
- 12 volt operation runs from vehicle battery while engine runs
- 150 PSI maximum working pressure handles demanding inflation tasks
- 17 CFM free flow at 0 PSI delivers steady air volume
- 100 percent duty cycle supports continuous operation without rest periods
- Hardmount design with vibration isolators reduces noise and movement
Mobile pneumatic compressor
The VIAIR 350C is a 12 volt air compressor kit rated for 150 PSI maximum working pressure and 1.52 CFM output, designed for mobile pneumatic tasks where the engine must be running during use. It suits off-roaders, overlanders and service vehicles needing reliable on-board air.
Hard-mount kit with vibration isolation
The unit includes mounting feet with four screw positions, vibration isolators and hardware for a secure hard-mount installation. This hardware lets the compressor stay fixed to a chassis or bracket while reducing transmitted vibration during operation.
100 percent duty cycle at 17 amps
The compressor runs a 100 percent duty cycle at a maximum draw of 17 amps, allowing continuous operation without cool-down pauses. Low amp draw keeps electrical load manageable while the engine supplies power.
Highlights
- 12 volt operation runs from vehicle battery while engine runs
- 150 PSI maximum working pressure handles demanding inflation tasks
- 17 CFM free flow at 0 PSI delivers steady air volume
- 100 percent duty cycle supports continuous operation without rest periods
- Hardmount design with vibration isolators reduces noise and movement
Specifications
| Type | Air Compressors |
|---|
Questions about this item
What does the 12-volt input cap in practice for the 350C compressor?
The 12-volt system requires the engine to be running during use and draws a maximum of 17 amps at 150 PSI.
What physical mounting does the 350C kit need to fit securely?
It hard-mounts using four screw positions on the built-in feet and includes vibration isolators plus mounting hardware.
How is the 350C installed, and which step is often missed?
Mount the unit on the four feet with the supplied isolators and hardware, then connect power; the step often missed is keeping the engine running while the compressor operates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



