VEVOR
VEVOR Retractable Mesh Gate 57 in Wide 38.5 in Tall White
Retractable mesh gate spans 57 in wide by 38.5 in tall, fitting openings up to 63 in inside or 61 in outside with included brackets, latches, screws and floor hook
- TypeOther Appliances
- Retractable mesh spans 57 in wide openings
- Fits inside frames up to 63 in wide
- Mounts outside frames up to 61 in wide
- Lightweight 1.8 kg frame with 10 screws supplied
- One-hand latch plus floor hook keeps pets contained
Retractable Mesh Gate 57 in Wide
The VEVOR retractable mesh gate spans openings up to 57 inches wide and stands 38.5 inches tall. It mounts inside a 63 inch frame or outside a 61 inch frame using the supplied brackets and anchors. The assembly weighs 3.97 lb and includes mesh door, two brackets, two latches, positioning stickers, ten screws with anchors, a floor hook kit and a user manual.
Suited for wide doorways and pet containment
Households needing a single barrier across a broad hallway or stair landing will find the 57 inch reach convenient. Installers who prefer a no‑drill option or who require a gate taller than 38.5 inches should look at alternative designs. The hardware pack provides exactly eight required screws plus two spares, so extra fasteners are not included for non‑standard studs.
Capacity and headroom
The gate comfortably covers interior widths up to 63 inches and exterior widths up to 61 inches. Beyond those limits the mesh cannot tension properly and the latches will not engage. The 38.5 inch height discourages most medium dogs from jumping over, yet very large breeds or determined climbers may still clear it.
Highlights
- Retractable mesh spans 57 in wide openings
- Fits inside frames up to 63 in wide
- Mounts outside frames up to 61 in wide
- Lightweight 1.8 kg frame with 10 screws supplied
- One-hand latch plus floor hook keeps pets contained
Specifications
| Type | Other Appliances |
|---|
Questions about this item
What mounting surfaces and hardware are needed to install the 57 in wide retractable mesh gate?
The gate includes 10 screws with anchors (8 required, 2 extra) and 2 brackets for wall or post mounting. A floor hook kit is also supplied. Inside installations need a 63 in / 1600 mm opening; outside installations need a 61 in / 1550 mm opening.
Can the 38.5 in tall mesh gate be used with existing latch hardware or only the supplied latches?
The package provides 2 dedicated latches and 2 positioning stickers for alignment. The manual does not reference third-party latch compatibility, so the supplied latches should be used for proper engagement.
How do I verify the gate is correctly tensioned and latched after setup?
Extend the mesh fully across the opening, engage both supplied latches until they click, and confirm the mesh lies flat without sagging. The floor hook should hold the bottom edge securely, and the positioning stickers help confirm bracket alignment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



