We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
VEVOR portable wire stripper, 11 channels, 10 blades, silver metal finish

VEVOR

VEVOR Portable Wire Stripper 11-Channel 10-Blade 75ft/min 370W 110V

SKU CH-G61T-DXB70

An electric wire stripper with 11 channels and 10 blades processes copper wire from 18 AWG to 1 inch OD at up to 75 ft/min

  • TypeOther Appliances
  • Strips multiple wires simultaneously with 11 channels and 10 blades
  • Handles wire diameters from 18 AWG up to 1 inch OD
  • Processes up to 75 feet per minute for fast recycling
  • 370W 110V motor delivers consistent power for heavy use
  • Alloy construction withstands rigorous daily operation for years

Portable Wire Stripper 11-Channel 10-Blade

The VEVOR portable wire stripper is an electric machine built for copper recycling. It handles wire diameters from 18 AWG up to 1 inch outer diameter using eleven feeding channels and ten cutting blades. The unit runs on a 370W motor at 110V 60Hz and strips at speeds up to 75 feet per minute. It is suited for scrap yards or workshops processing mixed wire bundles.

Capacity and headroom 11 channels 75ft/min

Eleven channels allow multiple wires to be stripped simultaneously, raising throughput for mixed loads. The 370W motor delivers steady power across the full 18 AWG to 1 inch range at 75 feet per minute. Very large or heavily armoured cables at the top end of the diameter range will move slower and demand more frequent blade checks. The machine is not designed for continuous duty on maximum-diameter wire without cooling pauses.

Build quality 370W 110V alloy frame

The frame uses a quality alloy construction rated for rigorous daily use and weighs 97.9 lbs. Four mounting points on the base let you bolt the stripper to a bench for stable feeding. A single on/off switch controls the 110V motor; no variable-speed dial is fitted. The 25.6 by 22 by 14.2 inch footprint needs a dedicated bench area and a 110V 60Hz supply.

Highlights

  • Strips multiple wires simultaneously with 11 channels and 10 blades
  • Handles wire diameters from 18 AWG up to 1 inch OD
  • Processes up to 75 feet per minute for fast recycling
  • 370W 110V motor delivers consistent power for heavy use
  • Alloy construction withstands rigorous daily operation for years

Specifications

TypeOther Appliances

Questions about this item

Will the 11-channel stripper handle the 18 AWG and 1-inch OD cables I already have?

Yes, the adjustable blades and rollers accept wire diameters from 18 AWG up to 1 inch OD, covering the full range you mentioned.

How can I verify the 370W motor is running at the rated 75 ft/min after setup?

Feed a known-length wire through any of the 11 channels, time the pass, and confirm the feed rate reaches about 75 feet per minute.

Does the 97.9 lb package include the 10 cutting blades installed, or must I buy blades separately?

The machine ships with all 10 cutting blades already fitted in the 11 channels; the box contains only the stripping machine itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.