We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Wall-mounted dust collector, metal body, 21-gallon fabric bag attached

VEVOR

VEVOR DC100M 1.0 HP 560 CFM 21 Gal Dust Collector

SKU CH-1Z2K-33948

Wall-mounted dust collector moves 560 CFM with a 21-gallon bag and 2.5-micron filtration for continuous workshop cleanup

  • TypeOther Appliances
  • High-flow 560 CFM suction clears sawdust fast
  • 21-gallon bag holds more debris between emptying
  • 5-micron filtration traps fine wood particles
  • 0 HP motor runs on standard 120 V power
  • Wall-mount design saves floor space in the shop

What it is and who it is for

This wall-mounted dust collector delivers 560 CFM of suction with a 1.0 HP motor running on 120 V 60 Hz power. It is built for woodworkers and small-shop operators who need to capture sawdust and fine sanding dust at the source without sacrificing floor space.

The spec that decides fit

The system filters particles down to 2.5 microns using a non-woven bag that holds 21 gallons (79.5 L) of debris. If your workflow generates larger volumes of chips per session or you require HEPA-grade filtration, this unit will not meet those needs.

How it fits into a build

Mounting hardware attaches the 450 x 350 x 400 mm body to a wall, extending to 1040 mm depth when the bag is installed. The 10.9 kg weight requires solid studs or masonry anchors. A standard 120 V outlet powers the motor, and the bag removes for emptying without tools.

Highlights

  • High-flow 560 CFM suction clears sawdust fast
  • 21-gallon bag holds more debris between emptying
  • 5-micron filtration traps fine wood particles
  • 0 HP motor runs on standard 120 V power
  • Wall-mount design saves floor space in the shop

Specifications

TypeOther Appliances

Questions about this item

What does 560 CFM suction mean when the collector is running in my shop?

The unit moves 560 cubic feet of air per minute, pulling coarse sawdust and fine sanding dust from the work area into the bag so the shop stays cleaner during cutting and sanding.

How does the 2.5-micron filter rating affect what dust is actually caught?

The filter traps particles down to 2.5 microns, capturing the fine wood dust that would otherwise stay airborne while letting larger chips fall into the 21-gallon bag.

What wall space and clearance does the 1040 x 350 x 400 mm mounted unit need?

With the bag attached the collector measures 1040 mm high, 350 mm wide and 400 mm deep; without the bag it is 450 mm high, so allow at least that footprint plus room to detach the bag for emptying.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.