We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dark blue electric wire stripping machine, rectangular aluminum body, feeding slot and control switch visible

VEVOR

VEVOR Automatic Electric Wire Stripping Machine 0.05"-0.98" Dark Blue

SKU CH-PRJM-EK50Z

Strips 1.5–25 mm copper wire at 60 ft/min with a 180 W induction motor and adjustable rollers

  • TypeOther Appliances
  • Strips wires from 1.5 mm to 25 mm diameter
  • 180 W motor delivers 60 ft/min stripping speed
  • Solid aluminium alloy frame with hardened blades
  • Emergency stop button prevents finger injuries
  • CE certified for 110 V single-phase operation

VEVOR Automatic Wire Stripper 0.05"-0.98

This VEVOR machine strips insulated copper wire from 1.5 mm up to 25 mm diameter. A 180 W induction motor drives the rollers at 60 feet per minute. The unit measures 31.7 cm by 20.8 cm by 30.4 cm and runs on 110 V single-phase power. It is built for scrap recycling yards and electrical contractors who process high volumes daily.

Suited for recycling centres

The feeder handles both solid and stranded conductors without tool changes. An emergency stop button cuts power instantly if a jam occurs. Buyers who only strip occasional household wiring or need battery operation should look at something else. The 110 V requirement also rules out sites without mains supply.

Check your workshop power

Confirm a 110 V 60 Hz outlet is available at the intended location. Allow at least 31.7 cm depth and 20.8 cm width on a stable surface. Verify the largest cable you process does not exceed 25 mm outer diameter. The package includes two feeding panels and an instruction manual.

Highlights

  • Strips wires from 1.5 mm to 25 mm diameter
  • 180 W motor delivers 60 ft/min stripping speed
  • Solid aluminium alloy frame with hardened blades
  • Emergency stop button prevents finger injuries
  • CE certified for 110 V single-phase operation

Specifications

TypeOther Appliances

Questions about this item

What power supply does the 180 W motor need?

The machine runs on a standard 110 V 60 Hz single-phase outlet.

Will the adjustable rollers grip the 1.5 mm wires I still process?

Yes, the feeding panels accept diameters from 1.5 mm up to 25 mm.

How do I confirm the 60 ft/min stripping speed is being reached?

Watch the wire feed smoothly through the rollers without jamming and listen for steady motor sound.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.