We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact yellow magnetic drill press with right-angle chuck, handle and coolant tanks

VEVOR

VEVOR 8840E Magnetic Drill Press 1300W 35 mm 45 mm

SKU CH-S7MF-0G7KX

Compact magnetic drill press with 1300 W load power, 35 mm core capacity, 45 mm depth and 10000 N magnetic force

  • Compact 280 × 100 × 210 mm design reaches tight work areas
  • 1300 W load power drills 35 mm diameter holes up to 45 mm deep
  • 10 000 N magnetic force holds the press securely during operation
  • Overload protection and cooling device prevent damage under heavy use
  • Weighs 10.4 kg for easy transport between job sites

Compact Magnetic Drill Press for Tight Workspaces

The VEVOR 8840E magnetic drill press delivers 1300W maximum load power in a low-profile frame weighing 10.4 kg. Its 10000N magnetic force secures the unit to ferrous surfaces for equipment installation and industrial drilling tasks. The fixed 650 rpm no-load speed suits consistent core drilling up to 35 mm diameter and 45 mm depth.

Simple Setup with Built-In Safeguards

Attach the handle, connect the coolant pipe to one of the two supplied tanks, and secure the safety rope before switching on. The right-angle shank chuck accepts compatible annular cutters directly. Overload protection trips under excessive force while the cooling device manages heat during deep cuts, reducing the risk of motor damage or cutter binding.

Verify Workpiece Thickness and Cutter Compatibility

Ensure the steel workpiece is thick enough for the magnetic base to develop full holding force on a flat, clean surface. Confirm your annular cutters match the right-angle shank and do not exceed the 35 mm diameter or 45 mm depth limits. Check that the 280 x 100 x 210 mm footprint fits the intended work area before ordering.

Highlights

  • Compact 280 × 100 × 210 mm design reaches tight work areas
  • 1300 W load power drills 35 mm diameter holes up to 45 mm deep
  • 10 000 N magnetic force holds the press securely during operation
  • Overload protection and cooling device prevent damage under heavy use
  • Weighs 10.4 kg for easy transport between job sites

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the magnetic base is holding at full 10000 N force before I start drilling?

After positioning the unit, switch the magnet on and check that the base sits flush with no rocking; a firm tug on the safety rope should not move the drill. The motor should run at the fixed 650 r/min no-load speed without bogging down when you apply feed pressure.

Which accessories come in the package and what must I source separately?

The box includes the 8840E drill press, handle, M10×30 hex bolt, two coolant tanks, coolant pipe, safety rope, two hex wrenches, quick wrench and user manual. Annular cutters, cutting fluid and any workpiece clamps are not included.

Should I choose this 35 mm / 45 mm capacity model or a larger one for 50 mm holes?

This 8840E is rated for a maximum 35 mm core diameter and 45 mm depth; if your application requires holes larger than 35 mm you will need a drill press with a higher capacity rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.