We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 5-gallon plastic pail with Valvoline branding and VV813 label

VALVOLINE

VALVOLINE Tractor Hydraulic Fluid VV813 5 gal Pail

SKU CH-VKA6-9JHS0

Universal tractor hydraulic fluid in a 5 gal pail meets Denison HF-0, John Deere JDM J20C and multiple OEM specifications with a 141 viscosity index

  • TypeBlow Guns, Air Guns & Spray Guns
  • Premium universal formula meets Denison HF-0 and major OEM specs
  • 200 °C flash point supports high-temperature hydraulic systems
  • 45 °C pour point ensures cold-weather start-up reliability
  • Viscosity index 141 maintains stable film strength across temperatures
  • Specific gravity 0.871 at 15.6 °C confirms consistent fluid density

Universal Tractor Fluid Specification

Valvoline VV813 is a premium universal tractor hydraulic fluid formulated for agricultural and industrial equipment requiring a single fluid for transmissions, hydraulics and wet brakes. It meets Denison HF-0, John Deere JDM J20C, Massey Ferguson, New Holland, Landini, Stieger Universal and Volvo WB 101 approvals. The product is supplied new in a 5 gal pail.

Thermal Behaviour and Consumption

The fluid has a flash point of 200 Degrees C and a pour point of -45 Degrees C, allowing operation across a wide temperature range. Specific gravity is .871 at 15.6 Degrees C with a viscosity index of 141, indicating stable viscosity during normal hydraulic and transmission duty cycles.

Approvals and Compatibility Impact

Meeting the listed OEM standards means the fluid can replace multiple dedicated products in mixed fleets, reducing inventory complexity and the risk of cross-contamination. The pail packaging suits workshop top-ups and smaller reservoir fills without requiring bulk dispensing equipment.

Highlights

  • Premium universal formula meets Denison HF-0 and major OEM specs
  • 200 °C flash point supports high-temperature hydraulic systems
  • 45 °C pour point ensures cold-weather start-up reliability
  • Viscosity index 141 maintains stable film strength across temperatures
  • Specific gravity 0.871 at 15.6 °C confirms consistent fluid density

Specifications

TypeBlow Guns, Air Guns & Spray Guns
BrandValvoline

Questions about this item

How do I fill the tractor's hydraulic system with this fluid, and what step is commonly missed?

Clean the reservoir area, remove the fill cap, and pour the fluid until the sight gauge shows the correct level; the step often missed is running the engine and cycling the hydraulics to purge air before the final top-off.

When will this fluid need to be replaced, and what signals it?

Replace it at the tractor manufacturer's recommended service interval or sooner if the fluid darkens, smells burnt, or water contamination appears; the pour point of -45 °C and flash point of 200 °C remain stable until degradation begins.

What is the first performance limit reached during heavy, continuous operation?

Under sustained high load the fluid temperature will approach its 200 °C flash point, reducing viscosity and film strength before any other limit is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.