We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass hose barb fitting with male threaded end

Value Brand

Value Brand SPEEDAIRE 6AFK6 Hose Barb Brass

SKU CH-EQ9W-P2J39

Brass push-on hose barb connects 5/16 in hose to 1/8 in male NPT for low-pressure air or water lines

  • Straight design simplifies air-line routing
  • Brass construction resists wear in daily use
  • 5/16 in barb fits matching hose securely
  • 1/8 in male NPT threads into standard ports
  • 7/16 in hex allows quick wrench tightening

Brass hose barb for low-pressure lines

The SPEEDAIRE 6AFK6 is a straight barbed fitting made from brass for low-pressure pneumatic and water systems. Its 5/16 inch barb connects to matching hose while the 1/8 inch male NPT end threads into ports. Brass construction resists wear during regular use.

Rigid straight fitting with 7/16 inch hex

The rigid body prevents movement after installation and the straight path eases routing. A 7/16 inch hex head provides a positive grip for tightening. The hose barb by NPT connection style secures the hose with a clamp while the tapered threads seal the port.

Replaces worn or leaking barbed fittings

This part replaces damaged brass barbs that leak air or water at the hose or thread seal. The jump is worth it when the old fitting shows corrosion, stripped threads or a split barb that cannot hold a clamp. California Proposition 65 warnings apply.

Highlights

  • Straight design simplifies air-line routing
  • Brass construction resists wear in daily use
  • 5/16 in barb fits matching hose securely
  • 1/8 in male NPT threads into standard ports
  • 7/16 in hex allows quick wrench tightening

Specifications

BrandSPEEDAIRE

Questions about this item

What does the 1/8 inch MNPT thread on the SPEEDAIRE 6AFK6 connect to?

The 1/8 inch male NPT thread screws into a matching female NPT port on an air compressor, regulator or other pneumatic component to create a sealed connection.

What size hex head does the SPEEDAIRE 6AFK6 fitting have for installation?

The fitting requires a 7/16 inch hex head, so a 7/16 inch wrench or socket is needed to tighten it properly.

How is the SPEEDAIRE 6AFK6 hose barb installed onto a 5/16 inch hose?

Push the hose onto the 5/16 inch barb until fully seated, then secure it with a hose clamp; the step often missed is tightening the clamp enough to prevent leaks under pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.