Value Brand
Value Brand Raised Panel Light Yellow 24 V DC 8mm Mounting
A 24 V DC raised panel indicator light with 8 mm mounting, yellow LED output, 20 mA draw and 100,000-hour rated life
- Engine BrandZORO SELECT
- Engine Size8mm Mounting dia
- Bright yellow LED for clear status indication
- 24 V DC operation suits industrial control panels
- 8 mm mounting diameter fits standard panel cutouts
- IP40 rating protects against solid objects >1 mm
- 100 000 hour average life reduces replacement frequency
24 V DC Raised Panel Light
This ZORO SELECT indicator provides a yellow LED signal at 24 V DC with an 8 mm mounting diameter. It draws 20 mA and uses a 0.11 male quick-disconnect for electrical connection. The brass-plated chrome bezel and ABS housing carry an IP40 rating and meet cRUus and RoHS standards.
Steady-state operation
Rated life reaches 100,000 hours at the specified 24 V DC supply and 20 mA draw. The IP40 enclosure protects against solid objects larger than 1 mm while the LED maintains consistent output without a defined burst-to-continuous derating in the data. Panel thickness up to 0.160 in is supported for secure mounting.
Pre-installation checks
Verify the panel cut-out matches the 8 mm mounting diameter and that material thickness does not exceed 0.160 in. Confirm the control circuit supplies 24 V DC and can deliver at least 20 mA per indicator. Ensure the 0.11 male quick-disconnect terminals are compatible with your wiring harness. Note the Proposition 65 warning for California installations.
Highlights
- Bright yellow LED for clear status indication
- 24 V DC operation suits industrial control panels
- 8 mm mounting diameter fits standard panel cutouts
- IP40 rating protects against solid objects >1 mm
- 100 000 hour average life reduces replacement frequency
Specifications
| Engine Brand | ZORO SELECT |
|---|---|
| Engine Size | 8mm Mounting dia |
Questions about this item
How much heat or noise does the 24 V DC LED panel light produce during continuous operation?
The LED draws 20 mA at 24 V DC, yielding very low power dissipation and no moving parts, so heat and noise are negligible in all-day use.
What wiring or connectors must I already have to install this 8 mm panel light?
You need a 24 V DC supply and a mating 0.11 male quick-disconnect terminal for the electrical connection.
Will the IP40-rated light fit the same 8 mm cut-out and panel thickness as my older indicators?
It mounts in an 8 mm diameter hole and accepts panel thickness up to 0.160 in, matching common legacy cut-outs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



