Value Brand
Value Brand Hose and Regulator Assembly 15 ft 11 in wc 250 psi
A 15 ft rubber hose and regulator assembly delivers 11 in wc outlet pressure at up to 250 psi for compatible portable gas torpedo heaters
- 11 in wc outlet pressure for consistent low-pressure fuel delivery
- 15 ft rubber hose provides flexible reach to portable heaters
- 250 psi maximum pressure rating handles demanding supply conditions
- Includes 3/8 in flare appliance swivel and POL fittings for ready connection
- Compatible with Grainger 3VE57 and 3VE58 portable gas torpedo heaters
15 ft Hose and Regulator Assembly
This 15 ft hose and regulator assembly connects portable gas torpedo heaters to a fuel supply. It includes a 3/8 in flare appliance swivel end fitting and a POL fitting for secure attachment. The rubber hose handles a maximum pressure of 250 psi and delivers an outlet pressure of 11 in wc. It is compatible with heater models 3VE57 and 3VE58.
Replaces worn or damaged heater hoses
Swap out an old assembly when the rubber shows cracking, the fittings leak or the regulator no longer holds 11 in wc. The jump is worth it when the heater fails to ignite or produces an unstable flame due to inconsistent fuel pressure. New rubber and fresh seals restore the proper flow rate for reliable heater operation.
Limited to 250 psi and 11 in wc outlet
The regulator is factory-set to 11 in wc and cannot be adjusted for higher or lower pressure appliances. Maximum supply pressure must not exceed 250 psi, so the assembly is unsuitable for high-pressure distribution lines. The 5/8 in outlet size and included fittings determine which heaters can be connected without adapters.
Highlights
- 11 in wc outlet pressure for consistent low-pressure fuel delivery
- 15 ft rubber hose provides flexible reach to portable heaters
- 250 psi maximum pressure rating handles demanding supply conditions
- Includes 3/8 in flare appliance swivel and POL fittings for ready connection
- Compatible with Grainger 3VE57 and 3VE58 portable gas torpedo heaters
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What hose length and outlet size does this assembly need to reach my heater?
The assembly includes a 15 ft rubber hose with a 5/8 in outlet size for connection to compatible heaters.
Which fittings must be tightened first when installing the POL and flare ends?
Thread the POL fitting onto the tank valve by hand, then attach the 3/8 in flare swivel to the heater before pressurising to 250 psi.
When should I replace the rubber hose and regulator set?
Replace the assembly if the rubber hose shows cracking, the regulator fails to hold 11 in wc outlet pressure, or after any impact damage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



