We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Plastic spool of flux-cored welding wire, .035 in diameter, 10 lb weight

Value Brand

Value Brand E71T-11 Flux Cored Welding Wire .035 in 10 lb

SKU CH-TTCR-FV916

Flux-cored wire for self-shielded carbon-steel welding on a 10 lb plastic spool

  • TypeWelding Supplies
  • E71T-GS classification suits single-pass carbon steel welding
  • Self-shielded flux core needs no external gas supply
  • 035 in diameter fits standard MIG gun liners
  • 70 ksi tensile strength meets structural weld requirements
  • 10 lb plastic spool feeds smoothly on bench machines

E71T-GS flux-cored wire for carbon steel

This self-shielded flux-cored welding wire carries AWS classification E71T-GS and is formulated for carbon-steel-to-carbon-steel joints. It arrives on a 10 lb plastic spool in new condition. The wire diameter is .035 in and the process is flux-cored welding (FCAW). It runs on DCEN current.

Suitable for general fabrication

The wire is intended for welders who need a self-shielded consumable for flat and horizontal work on carbon steel. It is not for applications that require a gas-shielded wire, stainless or aluminium filler, or a different AWS classification. Shops needing higher deposition rates or all-position capability with shielding gas should evaluate other products.

.035 in diameter on a 10 lb spool

The .035 in diameter determines compatibility with drive rolls, contact tips and liner sizes on the welding machine. The 10 lb spool weight decides whether it fits the wire feeder and how often spool changes occur. Verify both values against the equipment before ordering.

Highlights

  • E71T-GS classification suits single-pass carbon steel welding
  • Self-shielded flux core needs no external gas supply
  • 035 in diameter fits standard MIG gun liners
  • 70 ksi tensile strength meets structural weld requirements
  • 10 lb plastic spool feeds smoothly on bench machines

Specifications

BrandWESTWARD
TypeWelding Supplies

Questions about this item

How do I confirm the wire feeds correctly and produces sound welds on carbon steel after setup?

Check for smooth feeding through the gun and consistent penetration using DCEN polarity; the E71T-GS classification and self-shielded flux core are rated for carbon steel to carbon steel joints with 70 ksi tensile strength.

What comes in the package and what additional items are needed to start welding?

The box contains a 10 lb plastic spool of .035 in E71T-GS flux-cored wire; you will need a compatible FCAW welder set to DCEN, a suitable contact tip, and standard safety gear.

Which wire specification should I select for general purpose carbon steel fabrication?

Choose the E71T-GS, .035 in diameter, 10 lb spool; it is self-shielded, runs on DCEN, and meets 70 ksi tensile strength for carbon steel to carbon steel welding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.