We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight brass barbed hose fitting with hex head

Value Brand

Value Brand 6AFN6 Barbed Hose Fitting 3/4 in Hose ID

SKU CH-SRPR-1BKS8

Straight brass barbed hose fitting with 3/4 inch hose ID and NPT thread

  • Secure hose connection with 3/4 inch barb size
  • Corrosion resistant brass C37700 construction
  • Straight male-to-male NPT threaded design
  • Hex head allows easy wrench tightening
  • New condition ready for immediate installation

Brass Barbed Fitting 3/4 in

The ZORO SELECT 6AFN6 is a straight brass barbed hose fitting built for 3/4 in hose ID. It connects a 3/4 in male hose barb to a 3/4 in male NPT thread using C37700 brass construction. The fitting features a 1 1/16 in hex head for secure installation with standard tools. This component suits fluid or air transfer assemblies requiring a reusable straight connection.

Thermal Noise and Power Notes

As a passive brass component the fitting generates no heat, noise or electrical draw during operation. It carries no vacuum rating and is not rated for pressure limits in the supplied data. The brass material resists corrosion in typical compressed air and fluid lines. California Proposition 65 warnings apply for chemicals known to cause cancer and reproductive harm.

Build Fit and Clearance

The male by male configuration joins a barbed hose end directly to a threaded port without extra adapters. The 1 1/16 in hex allows tightening in confined areas where a wrench can engage. No power supply, controller or active cooling is needed for this mechanical joint. Buyers needing a different thread size, barb diameter or elbow shape must select another fitting.

Highlights

  • Secure hose connection with 3/4 inch barb size
  • Corrosion resistant brass C37700 construction
  • Straight male-to-male NPT threaded design
  • Hex head allows easy wrench tightening
  • New condition ready for immediate installation

Specifications

BrandZORO SELECT

Questions about this item

How do I install the 3/4 in barbed hose fitting and what step is often missed?

Push the hose fully onto the 3/4 in barb, then secure it with a clamp; the step often missed is tightening the clamp enough to prevent the hose from blowing off under pressure.

What maintenance or replacement will the brass C37700 fitting need over time?

Inspect the barb and NPT threads for corrosion or cracking; replace the fitting if the brass shows green deposits, thread damage, or if the hose seal leaks.

What limit appears first when the fitting is used continuously under pressure?

The 3/4 in hose-barb connection typically reaches its grip limit before the brass body fails, so the hose can slip off if the clamp loosens from vibration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.