We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight brass barbed hose mender, half-inch barbs, shiny finish

Value Brand

Value Brand 6AFL9 Barbed Hose Mender 1/2 in Brass 300 psi

SKU CH-PEN9-M7EH3

Straight brass barbed hose mender joins or repairs 1/2 in ID hose at up to 300 psi with crimped or clamp connections

  • Secure inline repair with straight barbed mender
  • Durable C37700 brass withstands 300 psi working pressure
  • Crimped or hose-clamp connection seals 1/2 in hose ID
  • Non-reusable design ensures permanent leak-free joint
  • California Proposition 65 warning for cancer and reproductive harm

Brass Barbed Hose Mender 1/2 in

The ZORO SELECT 6AFL9 is a straight barbed hose mender made from C37700 brass for 1/2 in internal diameter hose. It joins two hose ends inline using male hose barbs on both sides. The fitting is rated for a maximum working pressure of 300 psi and is designed for single-use installation. California Proposition 65 warnings apply for cancer and reproductive harm.

Check hose size and clamp method

Verify the existing hose has a 1/2 in internal diameter so the barbs seat correctly. Ensure you have suitable crimp ferrules or worm-drive hose clamps to secure each connection. Confirm the system operating pressure does not exceed the 300 psi rating. The fitting is non-reusable, so plan the repair before cutting the hose.

Crimp or clamp compatibility changes the seal

The mender accepts either crimped ferrules or standard hose clamps, letting you match the fastening method to your tooling. Crimping creates a permanent tamper-resistant joint while clamps allow future disassembly if the hose itself is reusable. Brass construction resists corrosion in compressed-air and fluid-transfer applications. No additional software or accessories are included.

Highlights

  • Secure inline repair with straight barbed mender
  • Durable C37700 brass withstands 300 psi working pressure
  • Crimped or hose-clamp connection seals 1/2 in hose ID
  • Non-reusable design ensures permanent leak-free joint
  • California Proposition 65 warning for cancer and reproductive harm

Specifications

BrandZORO SELECT

Questions about this item

What comes with the 6AFL9 barbed hose mender and do I need to buy clamps separately?

The fitting is supplied as a single brass mender with hose barbs on both ends; crimped or hose clamps are not included and must be purchased separately.

The spec lists C37700 brass — does that grade affect which hose or pressure rating I should choose?

C37700 is the brass alloy used for the body; the fitting is rated for 300 psi maximum working pressure with 1/2 in ID hose, so match your hose and system pressure to those limits.

The product is rated at 300 psi — will it hold that pressure in daily compressor use?

Yes, the 300 psi rating is the maximum internal working pressure for the straight brass mender when installed with proper clamps on 1/2 in ID hose.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.