Value Brand
Value Brand 41R256 MIG Welding Wire ER308L .023 10 lb
Stainless-steel MIG wire ER308L on a 10 lb plastic spool, .023 in diameter, for grades 201, 202, 301, 302, 304, 304L, 304LN, 308, 308L, 321 and 347
- TypeWelding Supplies
- ER308L grade matches 304 and 308 stainless steels
- .023 inch wire enables precise MIG welds on thin sheet
- 88 ksi tensile strength produces strong corrosion-resistant joints
- 10 lb plastic spool feeds smoothly through wire feeders
- DCEP current designation suits standard MIG power sources
Stainless Steel MIG Wire
Value Brand 41R256 MIG welding wire is an ER308L classification spool for MIG welding of stainless steel grades 201, 202, 301, 302, 304, 304L, 304LN, 308, 308L, 321, 347. The spool weighs 10 lb and uses a plastic spool type with DCEP current designation.
Wire Diameter Consideration
This .023 in diameter wire suits welders joining thin stainless sheet or performing detailed fabrication work. Fabricators needing higher deposition rates for thick plate should consider larger diameter wire instead.
Tensile Strength Rating
The as-welded tensile strength is 88 ksi with a minimum required yield strength of 59 ksi, confirming the wire meets structural requirements for certified stainless steel joints.
Highlights
- ER308L grade matches 304 and 308 stainless steels
- .023 inch wire enables precise MIG welds on thin sheet
- 88 ksi tensile strength produces strong corrosion-resistant joints
- 10 lb plastic spool feeds smoothly through wire feeders
- DCEP current designation suits standard MIG power sources
Specifications
| Brand | WESTWARD |
|---|---|
| Type | Welding Supplies |
Questions about this item
How often will I need to replace the 10 lb spool of .023 ER308L wire?
Replacement frequency depends on your weld volume; the spool holds 10 lb of 0.023 in stainless wire for MIG welding on grades 201, 202, 301, 302, 304, 304L, 304LN, 308, 308L, 321 and 347.
What mechanical limit appears first during extended MIG runs with this ER308L wire?
The as-welded tensile strength is 88 ksi and yield strength is 59 ksi; exceeding these values risks joint failure before the wire itself degrades.
How much heat and power does the 10 lb spool add during all-day DCEP welding?
The wire is a consumable filler metal; heat and power draw come from the welding power source, not from the 10 lb plastic spool itself.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213019BTC
In stock