We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cardboard box containing 10 lb of 36 in carbon steel welding rods 1/16 in diameter AWS R45 classification

Value Brand

Value Brand 41R244 36" Welding Rod 1/16" AWS R45 10 lb

SKU CH-BD3T-M5E7Z

Carbon steel gas welding rod, 1/16 inch diameter by 36 inches long, AWS R45 classification, 10 lb box

  • TypeWelding Supplies
  • AWS R45 classification for carbon-steel gas welding
  • 1/16 in diameter suits fine joint work
  • 36 in length reduces rod changes
  • 10 lb box keeps supply on hand
  • Meets AWS A 5.2 tensile standard

Carbon-steel gas welding rod for flat

This 36-inch rod is made from carbon steel and carries an AWS R45 classification for gas welding carbon steel to carbon steel. It is supplied in a 10 lb box and intended for welders who need a basic filler metal for flat or horizontal positions.

Simple to start with standard gas-welding equipment

The rod feeds into a conventional oxy-fuel torch without special preparation, but moisture on the surface can cause porosity so store the box in a dry place. Overheating the tip or moving too quickly are the most common causes of weak beads.

Check your base metal

The AWS A 5.2 R45 rating applies only to carbon-steel workpieces in flat or horizontal positions, so vertical or overhead joints are not covered. Verify that your torch setup can deliver the heat needed for 1/16-inch diameter rod and that the material you are joining matches the carbon-steel specification.

Highlights

  • AWS R45 classification for carbon-steel gas welding
  • 1/16 in diameter suits fine joint work
  • 36 in length reduces rod changes
  • 10 lb box keeps supply on hand
  • Meets AWS A 5.2 tensile standard

Specifications

BrandWESTWARD
TypeWelding Supplies

Questions about this item

How can I verify the weld deposit meets the 45 ksi tensile strength after using these rods?

Perform a tensile test on a sample weld made with the 1/16 inch diameter rod on carbon steel in flat or horizontal position; the as-welded strength should reach 45 ksi per AWS A5.2 R45 classification.

What comes in the 10 lb box and what extra items are needed to start welding?

The box contains ten pounds of 36 inch long 1/16 inch carbon steel gas welding rods classified AWS R45; you must supply a compatible gas welding torch, fuel gas, oxygen and personal protective equipment.

When should I choose the R45 1/16 inch 10 lb box over another diameter or weight?

Select this 1/16 inch diameter when joint fit-up and heat input call for a smaller rod, and the 10 lb box when the project volume matches that quantity; the R45 grade suits carbon-steel-to-carbon-steel joints in flat or horizontal positions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.