We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flux-coated bronze brazing rod, 1/8 inch diameter, 36 inch length, 1 lb tube

Value Brand

Value Brand 41R235 Brazing Alloy 1/8 In 1 lb

SKU CH-BP4Y-K1GK5

A flux-coated low-fuming bronze brazing rod, 1/8 in diameter by 36 in length, with solidus at 590 °F and liquidus at 630 °F, supplied in a 1 lb container

  • TypeWelding Supplies
  • Flux-coated rod simplifies brazing without separate flux
  • Low-fuming bronze alloy reduces hazardous fume exposure
  • 1/8 in diameter fits standard torch tips
  • 1 lb container suits workshop and field jobs
  • Tensile strength 71 ksi ensures durable joints

Brazing Alloy 1/8 In 1 lb

This Value Brand brazing alloy comes as flux-coated rods for general brazing work. The low-fuming bronze composition contains zero percent silver and meets AWS classification RBCuZn-C. Each rod measures 36 in overall length with a 1/8 in diameter, supplied in a 1 lb container.

Installation notes

Flux coating simplifies joint preparation because the flux activates during heating. Heat the base metal to the solidus point of 590 Degrees F and flow the alloy up to the liquidus of 630 Degrees F. Overheating past the capacity temperature of 750 Degrees F can cause excessive fuming and weaken the joint.

Who this suits

Suitable for fabricators and repair technicians who need a flux-coated bronze brazing rod with 71 ksi tensile strength and 64 ksi yield strength. Not for users who require a silver-bearing alloy for higher strength or electrical conductivity, or those needing a bare rod for controlled flux application.

Highlights

  • Flux-coated rod simplifies brazing without separate flux
  • Low-fuming bronze alloy reduces hazardous fume exposure
  • 1/8 in diameter fits standard torch tips
  • 1 lb container suits workshop and field jobs
  • Tensile strength 71 ksi ensures durable joints

Specifications

BrandWESTWARD
TypeWelding Supplies

Questions about this item

How can I confirm the brazing rod is flowing correctly after heating?

The flux-coated rod should melt smoothly between 1,590 °F solidus and 1,630 °F liquidus, producing a uniform bronze fillet without excessive fuming.

What comes in the 1 lb container and what extra items are needed?

The package contains flux-coated RBCuZn-C rods, 1/8 in diameter and 36 in long; a compatible torch capable of reaching 1,750 °F and appropriate safety gear must be supplied separately.

Which alloy specification should I select for general-purpose bronze brazing?

Choose the RBCuZn-C (AWS classification) low-fuming bronze rod with 0 % silver content, 71 ksi tensile strength and 64 ksi yield strength for standard structural joints.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.