We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight steel barbed hose fitting with hex head and NPT thread

Value Brand

Value Brand 3LZ94 Barbed Hose Fitting 1 1/4 in Steel

SKU CH-56X2-FH12G

Steel barbed hose fitting with 1 1/4 in barb and NPT threads rated to 100 psi

  • Steel construction handles 100 psi service pressure
  • Straight 1 1/4 in barb simplifies hose routing
  • Hose Barb x NPT connects different diameter tubes
  • Reusable design allows repeated assembly with care
  • 1 1/4 in hex head eases installation with standard tools

Barbed Hose Fitting for Low-Pressure Service

The Value Brand 3LZ94 is a straight steel barbed hose fitting built for low-pressure water suction and discharge applications. Its 1 1/4 inch barb connects to hose of the same inside diameter, while the male NPT thread joins to threaded pipe or equipment. The rigid straight shape simplifies routing and termination of hose lines in industrial and automotive fluid systems.

Rated for 100 psi Working Pressure

The fitting carries a designated maximum pressure of 100 psi, making it suitable for low-pressure water transfer duties. Steel construction resists deformation under normal clamping loads and provides durability in typical workshop environments. The reusable design allows disassembly and reinstallation with appropriate care, reducing waste during system maintenance or reconfiguration.

Hex Head Enables Standard Tool Installation

A 1 1/4 inch hex head allows tightening with common wrenches, ensuring a secure threaded seal without specialised tools. The Hose Barb x NPT connection type bridges flexible hose and rigid pipe of differing diameters in a single component. California Proposition 65 warnings apply, noting the presence of chemicals known to cause cancer and reproductive harm.

Highlights

  • Steel construction handles 100 psi service pressure
  • Straight 1 1/4 in barb simplifies hose routing
  • Hose Barb x NPT connects different diameter tubes
  • Reusable design allows repeated assembly with care
  • 1 1/4 in hex head eases installation with standard tools

Specifications

BrandZORO SELECT

Questions about this item

How do I install the 1 1/4 in barbed fitting onto a hose and what step is often missed?

Slide the hose over the barb until it seats fully then secure it with a proper hose clamp; the step most people skip is tightening that clamp enough to prevent blow-off at 100 psi

What maintenance or replacement will this steel fitting need over time?

Inspect the barb and NPT threads for corrosion or deformation each season; replace the fitting if the steel shows pitting, the hex head rounds off, or the hose seal no longer holds pressure

What limit appears first when this fitting runs continuously at its rated pressure?

The 100 psi maximum working pressure is the first limit; sustained operation above that value risks hose blow-off or fitting fatigue even though the steel body itself is reusable with appropriate care

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.