Value Brand
Value Brand 3LZ93 Barbed Hose Fitting 1 in Hose ID NPT
A steel barbed hose fitting with 1 in hose barb and 1 in male NPT threads for secure low-pressure water connections
- Steel construction delivers robust durability
- Barb and NPT ends enable versatile hose connections
- Knurled nipple grip eases installation
- Reusable design supports extended service life
- Suited for low-pressure water suction and discharge
Application & Purpose
The ZORO SELECT 3LZ93 is a steel barbed hose fitting built for low-pressure water suction and discharge service. It connects a 1 in hose to a 1 in male NPT threaded source. The rigid, straight design suits installers who need a dependable, reusable joint in fluid-transfer systems.
Connection Upgrade
This fitting replaces worn or mismatched adapters that leak under suction or vibrate loose on discharge lines. The knurled nipple grip gives a firmer hand hold during assembly, reducing the chance of cross-threading. The step up is worthwhile when an existing clamp-only joint cannot hold pressure or when a permanent crimp fitting would prevent future hose changes.
Build Integration
The barb end pushes into a 1 in ID hose and is secured with a separate clamp, while the NPT end threads into a matching port on pumps, tanks or valves. Steel construction handles the mechanical loads of repeated assembly without stripping. No proprietary tools are required, freeing the technician to use standard wrenches and clamps already in the kit.
Highlights
- Steel construction delivers robust durability
- Barb and NPT ends enable versatile hose connections
- Knurled nipple grip eases installation
- Reusable design supports extended service life
- Suited for low-pressure water suction and discharge
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What hose and thread sizes does the 3LZ93 barbed fitting accept?
The fitting has a 1 in hose barb on one end and a 1 in male NPT thread on the other, allowing a direct connection between a 1 in ID hose and a matching NPT port.
How is the knurled nipple grip used during installation, and what mistake should be avoided?
The knurled section provides hand grip for threading the NPT end into the port; the common error is over-tightening with a wrench, which can strip the threads or crack the port.
When should the steel fitting be inspected or replaced in a low-pressure water suction line?
Inspect the barb and threads for corrosion, deformation or leakage each time the hose is removed; replace the fitting if the barb shows pitting, the threads are damaged or the seal no longer holds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00212792BTC
In stock