We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel safety cable thirty eight inches long quarter inch diameter new condition

Value Brand

Value Brand 38 in 1/4 in Steel Safety Cable

SKU CH-H5C2-6CF9N

A 38-inch steel whip-check safety cable connects hoses up to 3 inches inside diameter at 125 psi maximum pressure

  • Prevents dangerous hose whip with 38 in steel cable
  • Handles up to 125 psi maximum hose pressure
  • Fits hoses from 1 1/2 in to 3 in inside diameter
  • 1/4 in diameter steel construction resists wear and corrosion
  • California Proposition 65 warning for cancer and reproductive harm

38-inch Steel Whip-Check Safety Cable

This 38-inch steel whip-check cable secures pressurised hose connections up to 125 psi. It fits hoses with an inside diameter between 1-1/2 and 3 inches. The 1/4-inch diameter steel construction provides a restraint that limits whip motion if a coupling fails.

Steel Build and Hose-to-Hose Mounting

The steel cable resists corrosion and wear in workshop and industrial environments. Its hose-to-hose whip-check design connects directly between two hose ends without additional tools. The 38-inch overall length allows enough slack for normal movement while keeping the restraint effective under pressure.

Replaces Worn or Missing Whip-Checks

This cable replaces damaged or absent whip-checks on existing compressed-air lines. The upgrade is worth it when current restraints show fraying, corrosion or have been removed during maintenance. It is not suited for hose sizes outside the 1-1/2 to 3-inch range or for pressures above 125 psi.

Highlights

  • Prevents dangerous hose whip with 38 in steel cable
  • Handles up to 125 psi maximum hose pressure
  • Fits hoses from 1 1/2 in to 3 in inside diameter
  • 1/4 in diameter steel construction resists wear and corrosion
  • California Proposition 65 warning for cancer and reproductive harm

Specifications

BrandZORO SELECT

Questions about this item

What hose pressure does the 1/4 in steel whip check cable support up to?

The cable is rated for a maximum hose pressure of 125 psi, limiting the force it must restrain during a hose failure.

What hose diameters does the 38 in safety cable fit between?

It fits hoses with inside diameters from 1 1/2 in to 3 in, covering the range specified for hose-to-hose whip check use.

How do you install the whip check cable and what step is often missed?

Loop each end over a hose coupling and pull the cable tight so the spring-loaded clips latch securely; the missed step is confirming both clips are fully seated before pressurising.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.