We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rubber water discharge hose, 100 ft coil, braided reinforcement

Value Brand

Value Brand 3" x 100 ft Rubber Water Discharge Hose 125 PSI

SKU CH-SZY0-PS2A3

A 100 ft rubber water discharge hose rated for 125 psi working pressure and a temperature range of -22 to 180 degrees F

  • Handles hot and cold water from -22°F to 180°F
  • 125 psi working pressure for reliable discharge jobs
  • 3:1 safety factor with 375 psi burst strength
  • Braided fiber reinforcement resists kinks and wear
  • 100 ft continuous length reduces couplings on site

3-Inch 100-Foot Rubber Discharge Hose

This hose moves water in agricultural irrigation, construction dewatering and general transfer jobs. Its SBR tube resists abrasion while the polyester braid reinforcement handles a 125 psi working pressure at 70 °F. The 375 psi burst rating and 3:1 safety factor give a reliable margin for continuous service.

Suited for steady water discharge, not suction

The construction handles temperatures from -22 °F to 180 °F, making it usable in cold-weather draining and warm-climate irrigation. It is not rated for vacuum, so operators who need suction capability should choose a hose with a vacuum rating. The bulk configuration also means no factory-fitted couplings are included.

100-foot length covers long runs with one piece

A single coil spans the full 100 feet, reducing leak points on extended layouts. The 3-inch inside diameter delivers high volume flow for pump discharge and flood control. At 125 psi maximum working pressure the hose runs out of headroom for high-pressure washing or fire-suppression systems that demand higher ratings.

Highlights

  • Handles hot and cold water from -22°F to 180°F
  • 125 psi working pressure for reliable discharge jobs
  • 3:1 safety factor with 375 psi burst strength
  • Braided fiber reinforcement resists kinks and wear
  • 100 ft continuous length reduces couplings on site

Specifications

BrandZORO SELECT

Questions about this item

What size hose clamps or couplings do I need for the 3-inch inside diameter?

The hose has a 3-inch inside diameter and a 3 3/8-inch outside diameter, so select clamps or cam-lock fittings sized for that 3 3/8-inch OD to seal properly.

Will the 125 psi working pressure match the output of my older 100 psi compressor?

Yes, the hose is rated for a maximum working pressure of 125 psi at 70 degrees F, which exceeds a 100 psi compressor output with a 3:1 safety factor to 375 psi burst.

How can I verify the hose is performing correctly after I connect it?

Pressurise the line to your normal operating pressure up to 125 psi at 70 degrees F and check for leaks, ballooning or soft spots; the braid-reinforced SBR tube should remain firm and leak-free.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.