We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver forged steel U-bolt clip for 3/16 inch wire rope

Value Brand

Value Brand 3/16 in Wire Rope U-Bolt Clip

SKU CH-987G-PMVQ2

Secures wire rope up to 3/16 in diameter with a forged steel U-bolt clip rated for lifting

  • Forged steel construction provides reliable lifting strength
  • U-bolt design secures 3/16 in galvanized wire rope
  • Minimum two clips required for proper load efficiency
  • 5 ft-lb installation torque ensures secure fastening
  • Prop 65 warning identifies chemical safety considerations

3/16 in U-Bolt Wire Rope Clip

This forged steel U-bolt clip is designed for 3/16 in diameter galvanized steel wire rope with a wire strand core. It provides a secure termination for lifting and pulling applications. Two clips are the minimum required for a safe connection. The silver finish resists corrosion in demanding environments.

For rigging 3/16 in galvanized rope

Suited for installers who need a forged steel clip rated for lifting with a 7.5 ft-lb installation torque. Not for users requiring a rated load efficiency figure or a clip certified for synthetic or fibre core ropes. Buyers needing stainless steel hardware or a larger rope capacity must select a different size.

Minimum two clips per termination

The manufacturer specifies that at least two clips are required to properly secure the rope end. Each clip requires a rope turnback length of 3 3/4 in and must be torqued to 7.5 ft-lb. California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • Forged steel construction provides reliable lifting strength
  • U-bolt design secures 3/16 in galvanized wire rope
  • Minimum two clips required for proper load efficiency
  • 5 ft-lb installation torque ensures secure fastening
  • Prop 65 warning identifies chemical safety considerations

Specifications

BrandZORO SELECT

Questions about this item

How do I install this 3/16 in wire rope U-bolt clip and what torque step is often missed?

Use at least two clips with a 3 3/4 in rope turnback and tighten the U-bolt nuts to the minimum installation torque of 7.5 ft-lb, which is the step many installers skip.

What maintenance or replacement will this forged steel clip need over time?

Inspect the steel clip regularly for wear, corrosion, or deformation on the U-bolt and saddle, and replace it if any damage appears or after a critical lifting event.

What is the first limit that appears when this clip is used continuously under load?

The minimum installation torque of 7.5 ft-lb must be maintained; sustained vibration or cycling can loosen the nuts, so re-torquing is the first recurring limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.