We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black phenolic 16 pole terminal strip 7.8 in long 1.12 in wide 0.59 in high

Value Brand

Value Brand 16 Pole 20A 300VAC Terminal Strip

SKU CH-QCPJ-59Y0V

A 16-pole phenolic barrier terminal strip rated 20 A at 300 VAC, accepting 22-12 AWG wire with 7/16 in center spacing

  • Engine BrandZoro Select
  • 16 poles distribute power across multiple circuits
  • 20 A rating handles substantial current loads
  • Accepts wire from 22 to 12 AWG
  • Phenolic housing insulates up to 300 VAC
  • Compact 7.8 in length fits tight panels

Industrial Power Distribution

The Value Brand 16-pole terminal strip handles 20 A at 300 VAC across two rows of barrier terminals. It suits control panels, generator wiring and general industrial power distribution where multiple circuits must share a compact phenolic housing.

Wiring and Mounting

Terminals accept wire from 22 AWG up to 12 AWG with a centre spacing of 7/16 in. Screw-down barriers secure each conductor, but the strip ships without a cover so installers must add insulation or guarding to meet local code requirements.

Circuit Capacity Decides Fit

The 16-pole count sets the maximum number of circuits you can terminate in one block. If your design needs more than sixteen connections, a single strip will not suffice and you must plan for additional blocks.

Highlights

  • 16 poles distribute power across multiple circuits
  • 20 A rating handles substantial current loads
  • Accepts wire from 22 to 12 AWG
  • Phenolic housing insulates up to 300 VAC
  • Compact 7.8 in length fits tight panels

Specifications

Engine BrandZoro Select

Questions about this item

How can I verify the terminal strip is working after wiring it up?

Apply power and measure voltage across each of the 16 poles with a multimeter; all circuits should read up to 300 VAC and carry up to 20 A without overheating the phenolic housing.

What comes in the box and what must I purchase separately?

The strip itself is supplied alone — no cover, no wire, no ferrules. You must buy 22–12 AWG conductors, crimp terminals or ring lugs, and mounting hardware separately.

Which version should I choose for a 20 A, 300 VAC panel with limited space?

This single 16-pole, 7.8 in long by 1.12 in wide by 0.59 in high barrier strip fits the rating; no other pole counts or voltage options are offered for this model.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.