Value Brand
Value Brand 10U325 Quick Coupler Low Loss 1/4 In MxF 90 Deg
Low-loss 90-degree quick coupler for refrigeration manifold hoses with 1/4-inch female connection
- Low-loss 90-degree angle preserves refrigerant charge
- Quick connect/disconnect speeds up hose changes on manifold
- 1/4-inch female thread fits standard refrigeration hoses
- Steel construction resists corrosion in HVAC service
- Prop 65 warning notes chemical risk for California users
1/4-Inch 90-Degree Low-Loss Quick Coupler
This ZORO SELECT coupler connects refrigeration manifold hoses with a 1/4-inch male-to-female fitting. The 90-degree angle allows routing in tight service spaces while the low-loss design minimises refrigerant release during connection and disconnection. It is built from steel with a silver finish for corrosion resistance. The coupler suits HVAC technicians performing charge, recovery or evacuation tasks.
Technicians needing angled manifold connections
The 90-degree orientation helps when straight couplers would interfere with surrounding components or hood space. Shops that only use straight fittings or require a different thread size should select an alternative coupler. The product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Buyers in restricted states must verify local regulations before ordering.
Verify hose thread and manifold compatibility
Confirm that your refrigeration hoses and manifold ports use 1/4-inch connections matching this coupler. Ensure the 90-degree bend clears adjacent fittings and that the low-loss shut-off function matches your service procedure. Check local Proposition 65 requirements if operating in California.
Highlights
- Low-loss 90-degree angle preserves refrigerant charge
- Quick connect/disconnect speeds up hose changes on manifold
- 1/4-inch female thread fits standard refrigeration hoses
- Steel construction resists corrosion in HVAC service
- Prop 65 warning notes chemical risk for California users
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What manifold hose thread does this 1/4 inch female coupler need to connect to?
It requires a 1/4 inch male flare fitting on the manifold hose for a secure connection.
Will the 90 degree angle on this low-loss coupler clear my existing gauge manifold body?
The 90 degree elbow design directs the hose away from the manifold, providing clearance around the gauge body.
How can I verify the low-loss valve is sealing properly after I attach this coupler?
Press the coupler onto the service port; the valve should open only when fully seated and close instantly when removed, preventing refrigerant escape.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00212739BTC
In stock