Unique-Bargains
Unique-Bargains Thermal Fuse 250V 15A 200°C 10pcs
A pack of ten single-use thermal cut-offs rated 250 V, 15 A and 200 °C for protecting appliances such as heaters, dryers and coffee makers
- Single-use thermal cutoff protects circuits from overheating
- Rated 250 V and 15 A for mains-powered appliances
- Triggers at 200 °C (392 °F) to interrupt fault current
- Compact 4 × 13 mm body fits tight equipment spaces
- Pack of 10 fuses covers multiple replacements
Single-use thermal cutoff for small appliances
The Unique-Bargains thermal fuse interrupts a circuit permanently when its fusible link melts at 200 °C or 392 °F. Each unit is rated for 250 V and 15 A and fits a 4 mm by 13 mm body with insulated metal leads. The pack contains ten identical pieces intended for one-time protection in heating equipment.
No active cooling and zero standby draw
Because the device is a passive fusible link, it generates no noise and consumes no power during normal operation. Heat from the protected appliance conducts through the aluminium body until the calibrated temperature is reached, at which point the link opens the circuit once and for all. No reset mechanism exists, so the fuse remains open until physically replaced.
Ten fuses enable multiple repairs or spares
The ten-piece quantity lets a technician replace a blown fuse in a hair dryer, iron, coffee maker or similar appliance and keep the remainder for future service calls. Insulated leads simplify soldering or crimping into existing wiring, but the supplier notes that professional knowledge is required and power must be disconnected before any replacement work begins.
Highlights
- Single-use thermal cutoff protects circuits from overheating
- Rated 250 V and 15 A for mains-powered appliances
- Triggers at 200 °C (392 °F) to interrupt fault current
- Compact 4 × 13 mm body fits tight equipment spaces
- Pack of 10 fuses covers multiple replacements
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
How do I install the 4x13 mm thermal fuse with 65 mm leads and what step is often missed?
Power off the appliance, remove the old fuse, check that the replacement matches the 250 V, 15 A and 200 °C ratings, then crimp or solder the insulated leads — the step most people skip is verifying the original body diameter and length before fitting.
What maintenance or replacement will the 15 A 200 °C thermal fuse need later?
It is a single-use cutoff; once the fusible link opens at 200 °C the fuse must be replaced — no reset or servicing is possible.
What limit appears first during sustained operation of the 250 V 15 A thermal fuse?
The 200 °C cut-off temperature is the first limit reached; when the body hits that temperature the fusible link melts and opens the circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213499BTC
In stock