We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black mini rocker switch, rectangular body, I/O markings, snap-in mount

Unique-Bargains

Unique-Bargains SPST 2P Mini Rocker Switch Black 125V/12A 250V/10A UL 5Pcs

SKU CH-9TVC-XC1EP

Pack of five SPST mini rocker switches rated 125V/12A and 250V/10A with UL certification and snap-in mounting

  • UL certified safety for reliable operation
  • SPST on-off action with clear I/O markings
  • Snap-in mount fits 20 x 7 mm panel cutout
  • Rated 12 A at 125 V AC and 10 A at 250 V AC resistive
  • Pack of five black switches for multiple installations

Five-Pack Mini Rocker Switches

This pack contains five SPST on-off rocker switches rated for AC 125V at 12A and 250V at 10A. Each unit carries UL certification and is intended for resistive loads in automotive, motorcycle or general low-voltage projects. The black plastic and metal bodies measure 21 by 9.5 by 28 millimetres overall.

Snap-In Mounting With Labelled Rocker

Installation uses a snap-in method into a 20 by 7 millimetre cut-out. The rocker is marked I/O for clear on-off indication. Ensure the panel thickness suits the clip retention; forcing the switch into an oversized hole can cause it to pop out under vibration.

Check Load Type And Voltage Before Wiring

Label ratings apply only to purely resistive AC loads. Inductive, lamp, motor or capacitive loads require the reduced currents listed in the specifications, and DC loads above 0.5A are not supported without verification. Confirm your circuit matches these limits before ordering.

Highlights

  • UL certified safety for reliable operation
  • SPST on-off action with clear I/O markings
  • Snap-in mount fits 20 x 7 mm panel cutout
  • Rated 12 A at 125 V AC and 10 A at 250 V AC resistive
  • Pack of five black switches for multiple installations

Specifications

BrandUnique Bargains

Questions about this item

How do I confirm the rocker switch is operating correctly after wiring it into my circuit?

After installation, toggle the rocker between the I and O markings; the circuit should open and close cleanly at each position without arcing or hesitation.

What comes in the package and are mounting hardware or terminals supplied separately?

The package contains five black SPST rocker switches; no screws, connectors or additional terminals are included.

Which version should I choose for a 125 V inductive load versus a 250 V lamp load?

For a 125 V inductive load the switch is rated at 4.2 A; for a 250 V lamp load the rating is 1.8 A — select based on the actual load type and voltage in your application.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.