We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular boat rocker switch with two terminals and 20mm round cutout

Unique-Bargains

Unique-Bargains SPST 2-Position Boat Rocker Switch UL Listed AC250V/10A 125V/12A

SKU CH-K7R2-0GQK4

A UL-listed SPST rocker switch rated for 250V/10A and 125V/12A, with a 20mm keyhole mount that prevents rotation

  • UL-listed safety for mains circuits
  • SPST latching action locks in position
  • 20 mm round cut-out simplifies panel mounting
  • Keyhole slot stops unwanted rotation
  • Derated specs for inductive, lamp and motor loads

SPST 2-Position Rocker Switch

This SPST latching boat rocker switch from Unique-Bargains provides on/off control for AC circuits in automotive and marine auxiliary equipment. It is suited for installers adding lighting or accessories to a vehicle or boat.

20 mm Round Cut-Out Installation

The switch fits a 20 mm round hole and includes a keyway slot that prevents unwanted rotation in the panel. No square cut-out is required, simplifying panel preparation for professional and DIY fitters alike.

AC Resistive and Derated Load Limits

The UL-listed rating covers purely resistive loads at 250 V 10 A and 125 V 12 A. Inductive, lamp, motor and capacitive loads must be derated to the lower current values supplied, and DC load ratings are substantially lower than the AC figures.

Highlights

  • UL-listed safety for mains circuits
  • SPST latching action locks in position
  • 20 mm round cut-out simplifies panel mounting
  • Keyhole slot stops unwanted rotation
  • Derated specs for inductive, lamp and motor loads

Specifications

BrandUnique Bargains

Questions about this item

How can I confirm the switch is working correctly after wiring it into a 20 mm panel cut-out?

With power applied, toggle the actuator; the connected load should turn on in one position and off in the other, matching the latching SPST action.

What hardware is included and what must I source separately?

The switch body with its keyhole anti-rotation slot is supplied; you must provide wiring, a 20 mm panel hole and any external fuse or relay the circuit requires.

Which current rating should I use when the switch controls a 125 V AC inductive load?

For inductive loads at 125 V AC the derated value is 4.2 A, not the 12 A resistive label rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.