We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Translucent silicone tube coiled 2.5 metres long 8mm inner diameter 10mm outer diameter

Unique-Bargains

Unique-Bargains Silicone Tube 8x10mm 2.5m

SKU CH-25FH-N5WDD

Food-grade translucent silicone tube, 8 mm ID × 10 mm OD, 2.5 m length, withstands –76 to +428 °F for fluid handling and pump applications

  • Food-grade silicone resists contamination for clean fluid handling
  • Wide -76 to +428 °F range suits extreme environments
  • Translucent wall enables visual flow inspection during use
  • Soft 65 Shore A hardness simplifies routing in tight spaces
  • 5 m length provides ample reach for pump connections

Silicone tube for fluid transfer

The 8 mm inner-diameter tube handles water, air and oil in pump, siphon and drain tasks. Food-grade silicone rubber stays non-reactive across a -76 °F to 428 °F range. A 1 mm wall gives 65-degree hardness while remaining softer than PVC or nylon alternatives.

Build quality and daily fit

Translucent walls let you inspect fluid flow visually during operation. The material resists UV, ozone, gases and moisture for extended outdoor or machinery use. Good electrical insulation properties suit casing jobs on electrical equipment. The 2.5 m coil cuts to custom lengths without special tools.

Upgrade from rigid tubing

Replaces stiff PVC or nylon lines that kink on tight bends or degrade under heat. The jump is worth it when repeated flexing, wide temperature swings or visual flow checks matter. Not for buyers who need higher pressure ratings or larger diameters than the 8 mm ID provides.

Highlights

  • Food-grade silicone resists contamination for clean fluid handling
  • Wide -76 to +428 °F range suits extreme environments
  • Translucent wall enables visual flow inspection during use
  • Soft 65 Shore A hardness simplifies routing in tight spaces
  • 5 m length provides ample reach for pump connections

Specifications

BrandUnique Bargains

Questions about this item

What temperature range does the 8x10mm silicone tube withstand?

The tubing handles continuous exposure from -76 to +428F, so it suits both freezing and high-heat fluid transfer without hardening or degrading.

What are the exact ID, OD and wall dimensions for fitting barbs or clamps?

Inside diameter is 8mm (.31"), outside diameter 10mm (.39"), giving a 1mm (.04") wall that slides over standard 8mm barbs and seals with a worm-drive clamp.

How do I cut and install the 2.5m length without kinking the soft silicone?

Use a sharp blade for a clean square cut, warm the tube in hot water to soften it further, push fully onto the barb, then secure with a clamp; avoid twisting during insertion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.