We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black plastic CR2032 battery holders with switches

Unique-Bargains

Unique-Bargains CR2032 Battery Holder Case With Switch 2pcs

SKU CH-0FRT-ZTCBR

Holds two CR2032 cells with an on/off switch and lockable case, outputting 6 V for low-current projects

  • Holds two CR2032 cells for a combined 6 V output
  • Integrated ON/OFF switch lets you cut power without removing batteries
  • Lockable housing keeps cells secure during handling
  • Supplied as a pair so you have a spare or dual setup
  • Lightweight 12 g construction adds minimal bulk to projects

Two CR2032 holder with switch

This pack contains two black plastic cases that each accept two CR2032 coin cells wired in series to deliver six volts. An integrated on-off switch and lockable cover secure the batteries during use. The units weigh 12 grams total and ship without cells included.

Check voltage and current needs

Verify that your device requires a six-volt supply from two series CR2032 cells and draws only a very small current. The thin leads and compact structure are not suited to loads that cause noticeable heating; stop use if the wires become warm. Ensure the physical dimensions match the available space in your project.

Suits low-power portable builds

Ideal for hobbyists powering small sensors, remotes or LED indicators where a compact six-volt source with a switch is convenient. Not suitable for applications needing higher current, rechargeable cells or a different voltage; buyers who need greater capacity or a ruggedised enclosure should look elsewhere.

Highlights

  • Holds two CR2032 cells for a combined 6 V output
  • Integrated ON/OFF switch lets you cut power without removing batteries
  • Lockable housing keeps cells secure during handling
  • Supplied as a pair so you have a spare or dual setup
  • Lightweight 12 g construction adds minimal bulk to projects

Specifications

BrandUnique Bargains

Questions about this item

Does the package include the CR2032 cells or just the two black holders with switches?

The pack contains two black plastic holders, each with an ON/OFF switch and lockable design; the CR2032 batteries are not included and must be purchased separately.

How do I decide between a single holder and this two-piece set for my 6 V project?

Each holder takes one CR2032 cell, so two holders wired in series provide the 6 V output the description specifies; buy the 2-piece set when you need that voltage.

The spec says 6 V output — will that hold up when I connect it to my circuit?

The 6 V comes from two fresh CR2032 cells in series, but the thin wires and small structure only support very small current loads; stop use if the wires become hot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.