We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three copper braided wicks on clear plastic spools 3.5mm wide 1.5m long 47mm reel diameter

Unique-Bargains

Unique-Bargains CP-3515 3.5mm Copper Braided Desoldering Wick 1.5M 3Pcs

SKU CH-WTFR-PY87F

Three copper-braided wicks, each 1.5 m long and 3.5 mm wide, remove excess solder from circuit boards and components

  • FeaturesCopper Tone Wire;Copper Braided;Solder Removing Device;Wire
  • TypeHI - Soldering
  • MaterialCopper & Plastic
  • Copper braid absorbs molten solder efficiently
  • Three 1.5 metre spools give extended use
  • 5 mm width suits standard joints
  • Light 30 gram pack is easy to handle
  • Compact 47 mm reels store neatly

Desoldering Wick for Solder Removal

The Unique-Bargains CP-3515 is a copper braided wick designed to remove excess solder during electronic repair work. It suits hobbyists, technicians and students who need to clean joints on circuit boards, radios or other small devices. Each pack contains three spools, providing enough length for multiple desoldering tasks.

Copper Braid on Plastic Spools

The wick uses copper tone wire braided into a 3.5mm width and wound on a 47mm diameter plastic reel. The braid draws molten solder away from the joint when heated with a soldering iron, leaving pads clean for rework. The spool format keeps the wire tidy and allows easy dispensing during detailed work.

Replaces Single-Use Wick Lengths

Compared to short pre-cut strips, these 1.5 metre rolls let you pull fresh braid for each joint without waste. The jump is worth it for anyone doing regular board-level repairs who wants a continuous supply on hand. It is not suited for high-volume production desoldering or specialised flux-coated braid requirements.

Highlights

  • Copper braid absorbs molten solder efficiently
  • Three 1.5 metre spools give extended use
  • 5 mm width suits standard joints
  • Light 30 gram pack is easy to handle
  • Compact 47 mm reels store neatly

Specifications

BrandUnique Bargains
FeaturesCopper Tone Wire;Copper Braided;Solder Removing Device;Wire Roll Spool;Solder Remover
TypeHI - Soldering
MaterialCopper & Plastic

Questions about this item

What width is the 3.5 mm copper braid and how much solder can it absorb in one pass?

The braid measures 3.5 mm wide and lifts a joint’s worth of solder each time you heat it; you simply advance fresh braid for the next joint.

Will the 47 mm plastic spool fit on my benchtop dispenser?

The reel is 47 mm in diameter and 30 g net, so it sits on most standard spool holders without modification.

How do I use the wick without leaving flux residue on the board?

Lay the braid on the joint, press the iron tip on top until solder flows into the copper, then lift both together; clean the area with isopropyl alcohol afterwards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.