We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic 9V battery holder with slide switch and red wires

Unique-Bargains

Unique-Bargains 9V Battery Case Black ON/OFF Switch 2-Wire

SKU CH-0P6T-E3ZVZ

Holds one 9V battery with a built-in on/off slide switch and 13 cm lead wires for quick power control

  • Compact 2.7" × 1.2" × 0.8" case fits tight spaces
  • Integrated ON/OFF slide switch controls power without unplugging
  • Pre-wired 5.1" leads on both terminals save soldering time
  • Lightweight 20 g plastic shell adds minimal bulk to projects
  • Holds one 9V cell with snap-on cover for secure storage

9V Battery Case with ON/OFF Switch

This black plastic holder fits a single 9V battery and includes a built-in slide switch plus two pre-wired leads. The body measures 6.8 x 3.2 x 2cm and the attached cables are each 13cm long. Total weight is 20g and the cover helps keep the cell secure during use.

Hobbyists and Repair Jobs

Suits anyone wiring a 9V cell into a low-power circuit, prototype board or portable device where a quick disconnect is handy. Not for builds that need more than 15W or 2A, nor for projects requiring multiple cells or a different voltage format.

15W and 2A Current Limit

The supplier states the case must not exceed 15W or 2A while operating, so this single figure decides whether the part matches the load. Exceeding either rating risks overheating the holder and the battery inside.

Highlights

  • Compact 2.7" × 1.2" × 0.8" case fits tight spaces
  • Integrated ON/OFF slide switch controls power without unplugging
  • Pre-wired 5.1" leads on both terminals save soldering time
  • Lightweight 20 g plastic shell adds minimal bulk to projects
  • Holds one 9V cell with snap-on cover for secure storage

Specifications

BrandUnique Bargains

Questions about this item

How do I wire the 2‑wire connector on this 9V battery case, and what is the common mistake?

Connect the red wire to positive and the black wire to negative; the step people get wrong is reversing the polarity, which prevents the on/off slide switch from controlling the circuit.

What maintenance or replacement will the 9V battery case need later?

The 9V battery inside must be replaced when depleted; the plastic holder, 13cm wires and slide switch are rated for the 15W and 2A limits and need no scheduled service.

What limit appears first during sustained use of this battery case?

The 2A current limit or 15W power limit will be reached first; exceeding either causes the battery to heat up, so stop use if the case becomes warm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.