Unique-Bargains
Unique-Bargains 4Pcs 15 inch 300N Yellow Gas Spring Struts
Set of four 15 inch 300N yellow gas springs with brackets lifts and holds hoods or hatches weighing 110 to 150 pounds
- TypeAT - Garage & Shop
- Four struts share the load for balanced support
- 300 N per strut lifts 110–150 lb total weight
- 15 inch stroke opens hoods and hatches fully
- M8×1.25 threads and included brackets fit many vehicles
- Metal construction with yellow finish resists corrosion
Universal gas spring kit for lids and hatches
Four 15 inch yellow gas springs rated at 300 newtons each arrive with eight mounting brackets and eight nuts. The set suits car boots, boat hatches, RV compartments and similar medium-weight covers that need reliable lift assistance.
Metal construction with M8 threaded rods and mixed
Each strut extends to 38.5 centimetres and compresses to 23 centimetres. The 18 millimetre housing contains an 8 millimetre rod ending in M8x1.25 threads. Round 8 millimetre holes and oval 10 by 8 millimetre slots on the 61 by 25 by 40 millimetre brackets give flexible mounting options.
Check cover weight and bracket clearance before
Combined force supports 110 to 150 pounds; heavier panels will overload the springs. Verify the compressed length of 23 centimetres fits your closed position and that the bracket footprint clears surrounding structure. Measure existing mounting points against the supplied hole patterns.
Highlights
- Four struts share the load for balanced support
- 300 N per strut lifts 110–150 lb total weight
- 15 inch stroke opens hoods and hatches fully
- M8×1.25 threads and included brackets fit many vehicles
- Metal construction with yellow finish resists corrosion
Specifications
| Brand | Unique Bargains |
|---|---|
| Type | AT - Garage & Shop |
Questions about this item
What force does each 15 inch gas spring provide and what total lid weight can the set of four support?
Each strut delivers 300N (67 lb) of force, and the four-piece kit is rated for lids weighing between 110 and 150 lb total; do not exceed 150 lb.
What are the compressed and extended lengths, and what mounting-hole patterns do the included brackets use?
Compressed length is 23 cm (9.06 in), extended length is 38.5 cm (15 in); brackets have an 8 mm round hole and a 10x8 mm oval hole on a 61x25x40 mm base.
What thread size do the rod ends use and what common mistake should be avoided during installation?
The rod ends use M8x1.25 threads; a common error is over-tightening the nuts and stripping the bracket holes, so snug them by hand plus a quarter turn only.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



