Unique-Bargains
Unique-Bargains 4mm x 8mm Silicone Tube 1M
Translucent silicone tube for pump and transfer use, 4 mm inner by 8 mm outer diameter, 1 m length, withstands 200 °C intermittent heat
- Handles 200 °C intermittent heat for demanding pump and transfer tasks
- Odourless, tasteless and inert material keeps conveyed fluids pure
- Flexible 4 mm inner by 8 mm outer diameter suits tight routing
- One metre (3.3 ft) length ready to cut to exact requirements
- Low-odour, oil-resistant silicone simplifies clean-up and disposal
4mm x 8mm Silicone Tube
This translucent silicone tube measures 4mm inner diameter by 8mm outer diameter and comes in a 1M length. It is designed for pump and transfer applications where a flexible, inert conduit is required. The material is odourless, tasteless and offers high temperature resistance up to 200C for intermittent use.
Suitable uses and limits
It suits machinery connections, liquor lines and electrical insulation sleeving where heat resistance and low odour are needed. Buyers needing a longer continuous run or a different inner diameter should look at other options. The single metre length may not cover extended routing without joints.
Temperature rating decides fit
The key specification is the 200C intermittent temperature limit which determines if the tube survives your thermal environment. Verify that your application stays within this ceiling before purchasing. The .16 inch inner diameter and .31 inch outer diameter define the flow capacity and fit.
Highlights
- Handles 200 °C intermittent heat for demanding pump and transfer tasks
- Odourless, tasteless and inert material keeps conveyed fluids pure
- Flexible 4 mm inner by 8 mm outer diameter suits tight routing
- One metre (3.3 ft) length ready to cut to exact requirements
- Low-odour, oil-resistant silicone simplifies clean-up and disposal
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
What inner and outer diameters does the 4 mm × 8 mm silicone tube have?
The tube has an inner diameter of 0.16 in and an outer diameter of 0.31 in, giving a wall thickness of about 2 mm.
How do I cut and fit the 1 m length without kinking the hose?
Measure the run, cut square with a sharp blade, then push the tubing straight onto the barb — twisting while pushing causes permanent kinks.
When should I replace the tubing if it sees 200 °C intermittent peaks?
Inspect for surface cracking or hardening after each high-heat cycle; replace once the material loses its original flexibility or turns opaque.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



