We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ABS battery holder for four AA cells with enclosed wires and mounting holes

Unique-Bargains

Unique-Bargains 4 x AA Battery Holder 6V Enclosed Wires

SKU CH-3Y37-FYYX5

Holds four AA cells to deliver 6 V through 15 cm enclosed wires with screw-mount holes

  • Holds four AA cells for 6 V output
  • ABS enclosure weighs only 15 g
  • 15 cm leads reach tight spaces
  • 3 mm mounting holes spaced 15 × 47 mm
  • Rated for loads under 10 W and 2 A

4 x AA Battery Holder 6V Output

This enclosed holder accepts four 1.5V AA cells and delivers a combined 6V supply through attached wires. It is intended for hobbyists, students or technicians who need a compact, portable power source for low-current projects. The ABS case measures 63 x 58 x 15mm and weighs 15g.

Screw-Mount Installation With Thin Wires

Two 3mm mounting holes spaced 15 x 47mm allow the holder to be screwed into an enclosure or panel. The 15cm lead wires are thin and suited only to very small current loads; the supplier notes that maximum power should stay below 10W and current below 2A. Overheating wires indicate the load is too high.

Low-Current Prototyping And External Power

This unit suits builders who need a lightweight 6V supply for microcontroller boards, sensor modules or similar low-draw circuits. It is not for anyone requiring higher current capability, longer leads, included batteries or mounting screws, or a holder rated for loads above the stated limits.

Highlights

  • Holds four AA cells for 6 V output
  • ABS enclosure weighs only 15 g
  • 15 cm leads reach tight spaces
  • 3 mm mounting holes spaced 15 × 47 mm
  • Rated for loads under 10 W and 2 A

Specifications

BrandUnique Bargains

Questions about this item

How can I verify the holder is delivering the correct 6 V after I insert four 1.5 V AA batteries?

Measure the voltage across the two wire leads with a multimeter; it should read approximately 6 V when fresh batteries are installed.

What comes in the package and what must I supply myself?

The box contains one black ABS battery holder with 15 cm enclosed wires; you must provide four AA batteries and mounting screws separately.

Which version should I choose for a project that draws less than 2 A and under 10 W?

This single 4 × AA 6 V holder is rated for currents below 2 A and power below 10 W, making it suitable for low-current applications only.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.