We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six small ceramic tube fuses with metal end caps, 30mm long, 6mm diameter

Unique-Bargains

Unique-Bargains 2A 250V 6x30mm Ceramic Fast Blow Fuse 6pcs

SKU CH-AN24-N25S8

Ceramic fast-blow fuses rated 2 A at 250 V protect circuits from overload and short-circuit in amplifiers, ballasts and other equipment

  • Fast-acting protection for circuits and wiring
  • 2 A / 250 V rating matches spec requirements
  • Ceramic tube with nickel-plated brass caps resists heat
  • 6 × 30 mm size fits standard fuse holders
  • Pack of six provides ready spares

What this fuse kit is for

These 2 A, 250 V ceramic cartridge fuses protect car amplifiers, energy-saving lamp ballasts and similar low-current circuits from overload and short-circuit damage. The fast-blow element reacts quickly to excess current, helping preserve wiring and semiconductor components. Six pieces are included for multiple replacements or spares.

Installing and common mistakes

Power must be switched off before removing the old fuse. Verify that the original fuse measures 6 mm diameter by 30 mm length and carries the same 2 A, 250 V ratings; a mismatch in any of these values will leave the circuit unprotected or cause nuisance blowing. The nickel-plated brass end caps fit standard fuse holders without tools.

Who should buy and who should not

Suitable for hobbyists and technicians servicing automotive audio gear or lighting ballasts that specify a 6 x 30 mm, 2 A ceramic fuse. Not suitable for buyers who need a different current rating, voltage rating or physical size, or for circuits that require a slow-blow characteristic.

Highlights

  • Fast-acting protection for circuits and wiring
  • 2 A / 250 V rating matches spec requirements
  • Ceramic tube with nickel-plated brass caps resists heat
  • 6 × 30 mm size fits standard fuse holders
  • Pack of six provides ready spares

Specifications

BrandUnique Bargains

Questions about this item

How can I confirm the 2A 250V ceramic fuse is working after installation?

With power off, use a multimeter in continuity mode across the nickel-plated brass end caps; a beep or near-zero resistance shows the ceramic element is intact.

What comes in the pack and is anything else required for fitting?

The pack contains six 6mm x 30mm ceramic cartridge fuses; no extra hardware is included, so ensure your fuse holder matches the 6mm diameter and 30mm length.

When should I choose the 2A 250V version instead of a different rating?

Select this 2A 250V fast-blow fuse only when the circuit you are protecting specifies exactly 2 amps at up to 250 volts; different current or voltage ratings need a different fuse.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.