We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black plastic battery holders with ON/OFF switches and covered wires, 41g each

Unique-Bargains

Unique-Bargains 2 Pcs Battery Holder Case 18V 41g

SKU CH-CR1N-WZWX9

Holds two 9V batteries to deliver 18V output in a lightweight 41g plastic case with an integrated on/off switch

  • Holds two 9V batteries for 18V output
  • Weighs only 41g for easy portability
  • Includes ON/OFF switch for convenient power control
  • Wires pre-covered for quick soldering connections
  • Supplied as a pack of two holders

Dual 9 V battery holder for low-current projects

This holder accepts two standard 9 V batteries and combines them to deliver an 18 V supply. It is aimed at hobbyists and technicians who need a lightweight external power source for soldering, testing or similar low-power tasks. The unit weighs 41 g and is supplied as a pair of black plastic cases.

Maximum continuous rating of 5 W and 2 A

The supplier specifies that the assembly must not exceed 5 W or 2 A during operation. Thin internal wiring and the simple contact structure limit the holder to very small current loads; connecting a larger load will cause the wires to heat up and can damage the unit.

Simple snap-in installation with heat monitoring

Each battery slides into the moulded compartment and the integrated on/off switch breaks the circuit without soldering. Users must watch battery temperature during use and stop immediately if the wires become warm. Poor-quality cells increase the risk of overheating, so only reliable 9 V batteries should be fitted.

Highlights

  • Holds two 9V batteries for 18V output
  • Weighs only 41g for easy portability
  • Includes ON/OFF switch for convenient power control
  • Wires pre-covered for quick soldering connections
  • Supplied as a pack of two holders

Specifications

BrandUnique Bargains

Questions about this item

What does the 18 V rating actually deliver once the holder is wired into a project?

Two 9 V batteries in series supply 18 V, but the thin wires and small contacts limit the holder to very light loads — keep draw well below the point where the leads get warm.

What interface standard governs the connection and what practical limit does it impose?

There is no formal standard; the unit uses two bare wires, and the maker warns that current must stay under 2 A and power under 5 W to avoid overheating.

What physical space and mounting method does the case need to fit securely?

The black plastic shell weighs 41 g and simply houses two 9 V cells; it has no brackets or screw holes, so you must provide your own enclosure or tie-down.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.