We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fifteen black rubber cord boot guards 20mm long 6mm inner diameter

Unique-Bargains

Unique-Bargains 15 Pcs Rubber Cord Boot Guard 20mm x 6mm

SKU CH-4VY8-5HQFW

Pack of 15 black rubber cord boots sized 20 mm by 6 mm to protect charger and power-tool cables from bending damage

  • FeaturesCord Protector;Rubber Protector;Power Tool;Cable Sleeve;Cabl
  • Protects cables from bending damage with 15 rubber boot guards
  • Fits 6 mm inner diameter wires for secure strain relief
  • 20 mm length covers vulnerable connection points on power tools
  • Lightweight 27 g pack adds minimal bulk to tool kits
  • Black rubber construction resists wear on chargers and aviation plugs

Purpose and fit

This 15-piece set of rubber cord boot guards suits electricians and DIY users who need to protect cable ends on power tools, chargers and aviation plugs. Each guard fits a 6mm inner diameter wire and a 20mm mounting depth.

Mounting limits

The guards require a 9.5mm by 4.5mm mounting hole, so they only work where that rectangular cut-out exists. They cannot be used on round ports or openings smaller than those dimensions.

Capacity and headroom

Fifteen pieces give enough spares for multiple tools or chargers, but the fixed 6mm bore means thicker cables will not fit. Heavier industrial cables exceeding that diameter need a different solution.

Highlights

  • Protects cables from bending damage with 15 rubber boot guards
  • Fits 6 mm inner diameter wires for secure strain relief
  • 20 mm length covers vulnerable connection points on power tools
  • Lightweight 27 g pack adds minimal bulk to tool kits
  • Black rubber construction resists wear on chargers and aviation plugs

Specifications

BrandUnique Bargains
FeaturesCord Protector;Rubber Protector;Power Tool;Cable Sleeve;Cable Sleeve Hose

Questions about this item

How do I choose between the 20mm length and 6mm inner diameter versions?

Each boot is a single 20mm long sleeve with a 6mm inner diameter, so there is no separate version to choose — the pack contains 15 identical pieces.

What does the 20mm length do for a cable in a real tool?

It covers roughly 0.78 inches of the cord right at the connector, stopping sharp bends that cause internal wire fatigue.

What interface does the 9.5mm x 4.5mm mounting hole fit?

The oval hole accepts panel cut-outs or gland threads up to 9.5mm by 4.5mm, limiting the boot to fixtures that match those dimensions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.