We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-plated brass M18 inductive sensor with M12 connector

Turck

Turck Ni8-M18E-AP6X-H1141 4611233 Inductive Sensor PNP M18

SKU CH-A08X-0R6C3 MPN Ni8-M18E-AP6X-H1141

An M18 threaded inductive sensor with PNP output and M12 connector for non-flush mounting

  • TypeTest Equipment
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • 8 mm switching distance detects metal targets reliably
  • PNP normally-open output simplifies PLC wiring
  • M12 male connector enables quick installation
  • Chrome-plated brass housing resists industrial wear
  • 10–30 VDC supply suits standard control voltages

M18 inductive sensor with PNP output

The Turck Ni8-M18E-AP6X-H1141 is a threaded-barrel proximity switch designed for industrial position sensing. It operates on a 10 to 30 VDC supply and provides a normally open PNP signal through an M12 connector. The chrome-plated brass housing suits non-flush mounting in metal environments.

Suited for PLC input modules needing a PNP signal

This unit fits machines that use 3-wire DC PNP logic and have an M12 connection point. It is not for systems that require NPN sinking outputs or AC voltage operation. Buyers who need flush mounting or a different thread size should look at other models.

8 mm rated switching distance

The sensor detects metal targets at up to 8 mm, which defines the clearances required in the fixture design. This distance is fixed by the M18 construction size and cannot be adjusted in the field. Verify that the application gap matches this specification before ordering.

Highlights

  • 8 mm switching distance detects metal targets reliably
  • PNP normally-open output simplifies PLC wiring
  • M12 male connector enables quick installation
  • Chrome-plated brass housing resists industrial wear
  • 10–30 VDC supply suits standard control voltages

Specifications

BrandTURCK
ModelNi8-M18E-AP6X-H1141 4611233
TypeTest Equipment
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How do I install the M18 x 1 threaded barrel and which step is often missed?

Screw the chrome-plated brass barrel into an M18 x 1 threaded hole, tighten to the specified torque, then connect the M12 x 1 male connector; the step often missed is confirming non-flush mounting clearance so the 8 mm sensing face is not obstructed.

What maintenance or replacement will the sensor need later?

The unit has no user-serviceable parts; the PNP output and connector are sealed, so only periodic cleaning of the chrome-plated sensing face and inspection of the M12 cable for damage are required.

What limit appears first under sustained use?

Continuous operation at the upper end of the 10–30 VDC supply range with a heavy load on the PNP output can cause internal temperature rise that triggers thermal protection before any mechanical wear occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.