We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M18 threaded brass inductive sensor, chrome finish, M12 connector

Turck

Turck Ni8-M18-AD4X 4411210 M18 inductive sensor

SKU CH-EJF5-ED018 MPN Ni8-M18-AD4X

M18 inductive sensor with 8 mm switching distance, 10–65 VDC two-wire output and M12 connector for non-flush mounting

  • TypeTest Equipment
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • 8 mm switching distance for reliable detection
  • 10–65 VDC supply suits many control systems
  • M12 male connector enables fast installation
  • Chrome-plated brass housing resists industrial wear
  • Non-flush mount design fits varied machine layouts

Turck M18 Inductive Sensor

The Turck Ni8-M18-AD4X 4411210 is a threaded-barrel inductive proximity switch built for industrial detection tasks. It suits automation engineers and maintenance technicians who need a non-flush mount sensor with a chrome-plated brass housing. The unit operates on a DC 2-wire circuit and provides a normally open contact output. It connects via an M12 × 1 male connector for quick integration.

8 mm Rated Switching Distance

The single specification that decides fit is the rated switching distance of 8 mm. This figure defines the maximum reliable detection range for standard metal targets in your application. If the target material, size or mounting geometry demands a longer or shorter sensing window, this model will not meet the requirement. No other range variant is described in the data.

10–65 VDC Supply and M12 Connector

The sensor requires a DC supply between 10 and 65 VDC and a mating M12 × 1 cable or cordset to complete the circuit. Its 2-wire output simplifies wiring by eliminating a separate signal conductor. The non-flush mounting style demands clear space around the sensing face, freeing the installer from flush-mount constraints. The 56 g metal body fits standard M18 × 1 threaded ports.

Highlights

  • 8 mm switching distance for reliable detection
  • 10–65 VDC supply suits many control systems
  • M12 male connector enables fast installation
  • Chrome-plated brass housing resists industrial wear
  • Non-flush mount design fits varied machine layouts

Specifications

BrandTURCK
ModelNi8-M18-AD4X 4411210
TypeTest Equipment
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How does the 8 mm switching distance behave when the sensor is mounted non-flush in a real machine?

The 8 mm rated distance applies with a standard target; non-flush mounting reduces the usable range because metal near the sensing face dampens the field, so the practical trigger point will be closer than 8 mm.

What does the M12 × 1 connector cap in practice for this 2-wire DC sensor?

The M12 × 1 male connector carries both power and signal on two pins, limiting the interface to simple NO switching without a separate signal line or diagnostic feedback.

What clearance does the M18 × 1 threaded barrel need to fit and mount securely?

The sensor requires an M18 × 1 threaded hole or a through-hole with a locknut, and because it is non-flush the barrel must protrude far enough that no metal surrounds the active face.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.