Turck
Turck NI20-M30-AP6X Inductive Sensor PNP M30×1.5 20mm 10-30VDC
Non-flush M30 inductive sensor with 20 mm switching distance, 10–30 VDC PNP output and chrome-plated brass housing
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 20 mm sensing range detects metal targets at distance
- PNP normally-open output simplifies PLC wiring
- 10–30 VDC supply suits industrial power rails
- Chrome-plated brass housing resists corrosion and impact
- M30 × 1.5 thread enables standard non-flush mounting
M30×1.5 inductive sensor with 20 mm range
The Turck NI20-M30-AP6X is a non-flush threaded-barrel proximity switch housed in chrome-plated brass. It operates on 10 to 30 VDC and provides a normally-open PNP output through an integral cable. The unit weighs 196 g and carries order number 4670511.
Suits PLC inputs needing a metal-mountable PNP
This sensor fits machines that require a long-range non-flush detector with a standard M30 thread and DC three-wire wiring. It is not for applications that need a flush-mount format, an NPN output type or a connectorised cable termination.
20 mm rated switching distance decides fit
The 20 mm sensing range is the single figure that determines whether the detector reaches the target in your mounting geometry. Verify the required non-flush clearance against this distance before ordering.
Highlights
- 20 mm sensing range detects metal targets at distance
- PNP normally-open output simplifies PLC wiring
- 10–30 VDC supply suits industrial power rails
- Chrome-plated brass housing resists corrosion and impact
- M30 × 1.5 thread enables standard non-flush mounting
Specifications
| Brand | TURCK |
|---|---|
| Model | NI20-M30-AP6X 4670511 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What is the maximum sensing distance before the sensor triggers under continuous operation?
The rated switching distance is 20 mm, so the sensor will activate when a metal target comes within that range.
How much heat or electrical load does the sensor add when powered all day?
It operates on 10–30 VDC with a PNP output, drawing only the current needed for the load; the housing is chrome-plated brass for durability.
What mounting hardware or mating cable is required to install this sensor?
The sensor has an M30 × 1.5 threaded barrel for direct mounting and a built-in cable connection, so no separate connector is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.0021445BTC
In stock