Turck
Turck Ni10-Q25-AN6X 4652330 Inductive sensor NPN electrician tool
Rectangular inductive sensor with 10 mm switching distance, NPN output and cable connection for DC 10…30 VDC applications
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 10 mm switching distance detects metal targets reliably
- NPN normally-open output simplifies PLC wiring
- 10–30 VDC supply fits standard control voltages
- PBT-GF30-V0 housing resists oils and impacts
- Compact 38.5 × 25 × 25.5 mm block saves panel space
Inductive sensor NPN
The Turck Ni10-Q25-AN6X is a rectangular inductive proximity sensor with an NPN normally-open output. It operates on a 10 to 30 VDC supply and is built for non-flush mounting in industrial automation tasks. The active face is positioned on the front of the 25.5 mm high housing. It suits electricians and maintenance engineers who need reliable metal detection.
Cable connection
The sensor terminates in a fixed cable connection rather than a plug-in connector. This simplifies wiring in panels where a junction box or terminal strip is preferred. The three-wire DC cable carries power and the switching signal directly to the controller. No separate connector accessories are required for installation.
10 mm switching distance
The rated switching distance is 10 mm, which defines the maximum reliable detection range for a standard target. The rectangular Q25 housing measures 38.5 by 25 by 25.5 mm and weighs 120 g. The PBT-GF30-V0 plastic body resists impact and many industrial chemicals. Buyers who need a longer sensing range or a flush-mountable format should select a different model.
Highlights
- 10 mm switching distance detects metal targets reliably
- NPN normally-open output simplifies PLC wiring
- 10–30 VDC supply fits standard control voltages
- PBT-GF30-V0 housing resists oils and impacts
- Compact 38.5 × 25 × 25.5 mm block saves panel space
Specifications
| Brand | TURCK |
|---|---|
| Model | Ni10-Q25-AN6X 4652330 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How often should the sensor cable be inspected or replaced after long-term use?
The 3-year parts coverage on the Ni10-Q25-AN6X suggests checking the cable at each preventive maintenance interval; replace it if the jacket shows cracking or the conductors are exposed.
What is the maximum sensing distance before the output becomes unreliable?
The rated switching distance is 10 mm; beyond that the NPN output may not trigger consistently.
Does the PBT-GF30-V0 housing get hot when the sensor runs continuously on 30 VDC?
Operating voltage is 10–30 VDC with a low-current NPN output, so the plastic housing stays near ambient temperature during all-day operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213704BTC
In stock