We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical M18 inductive sensor with black plastic housing and cable connection

Turck

Turck NI10-P18-Y1 10096 Inductive Sensor M18 10mm 8.2V

SKU CH-NRZX-DM1V0 MPN NI10-P18-Y1

M18 inductive sensor with 10 mm switching distance, 8.2 V NAMUR output and ATEX approvals for hazardous areas

  • TypeTest Equipment
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • 10 mm sensing range for reliable non-contact detection
  • M18 × 1 threaded barrel enables secure mounting in standard fittings
  • PA12-GF30 housing resists impact and chemical exposure
  • NAMUR output to DIN EN 60947-5-6 suits hazardous-area circuits
  • ATEX and SIL2 approvals support safety-critical installations

M18 Threaded Barrel Inductive Sensor

The Turck NI10-P18-Y1 10096 is a non-flush mount inductive sensor built for industrial detection tasks. Its M18 × 1 threaded barrel allows secure installation in machine frames or process equipment. The housing uses PA12-GF30-V0 plastic for chemical resistance and mechanical durability. It suits maintenance engineers and automation technicians specifying NAMUR-compliant devices.

Upgrade from Non-NAMUR or Flush Sensors

Switching to this model is worthwhile when a safety-rated NAMUR output to DIN EN 60947-5-6 is required for hazardous-area circuits. It replaces sensors lacking ATEX approvals for gas groups II 2G, II 3G and dust groups II 1D, II 2D, II 3D. The jump also makes sense when SIL2 and PLc functional safety ratings are mandated by the system integrator.

10 mm Switching Distance with 8.2 VDC Supply

The sensor delivers a rated switching distance of 10 mm on a nominal 8.2 VDC two-wire supply. Cable connection simplifies wiring in junction boxes or terminal compartments. It handles presence detection of metal targets in zones classified for explosive atmospheres. The 114 g weight and plastic barrel limit use where high mechanical impact or extreme heat beyond the material rating occur.

Highlights

  • 10 mm sensing range for reliable non-contact detection
  • M18 × 1 threaded barrel enables secure mounting in standard fittings
  • PA12-GF30 housing resists impact and chemical exposure
  • NAMUR output to DIN EN 60947-5-6 suits hazardous-area circuits
  • ATEX and SIL2 approvals support safety-critical installations

Specifications

BrandTURCK
ModelNI10-P18-Y1 10096
TypeTest Equipment
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

What thread size and mounting style does the M18 sensor require?

The sensor uses an M18 × 1 threaded barrel and is designed for non-flush mounting.

How do you connect the NAMUR output correctly?

Connect the two-wire DC cable to an 8.2 VDC NAMUR-compliant input per DIN EN 60947-5-6; the step often missed is using a proper NAMUR barrier or isolator.

When should the PA12-GF30 housing be inspected or replaced?

Inspect the plastic housing periodically for cracks or chemical damage; replace if the ATEX or SIL2 rating could be compromised by physical degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.