We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver swirl soldering tip, 11 mm barrel

TurboTorch

TurboTorch Swirl Soldering Tip 11mm

SKU CH-AZA1-63WHC

An 11 mm swirl flame tip for brazing and soldering with MAP/Pro or propane, quick-connect fitting and external ignition

  • TypeNew
  • Swirl flame wraps pipe evenly for faster joints
  • Quick-connect fitting snaps onto H-4 torch in seconds
  • Single-barrel tip handles 11 mm silver braze with MAP/Pro or propane
  • External lighter ignition gives instant flame control on site
  • 16 mm soft-solder capacity covers larger plumbing runs

Swirl Tip for Brazing and Soldering

The TurboTorch Swirl tip is a single-barrel accessory built for brazing and soft-solder work. It connects through a Quick Connect fitting and is ignited with an external lighter. The tip is made for plumbers and HVAC technicians who need a focused flame pattern on copper and brass fittings.

Upgrades from Standard Single-Flame Tips

This swirl pattern replaces a basic single-flame tip when a wider, more even heat wrap around the joint is required. The jump is worth it on larger diameter pipe where a standard flame leaves cold spots, or when brazing speed matters more than pinpoint precision on small components.

Capacity Limits with MAP/Pro and Propane

With MAP/Pro the tip handles silver braze up to 1/2 in and soft solder up to 1 1/2 in. On propane it covers silver braze to 1/2 in and soft solder to 1 in. Beyond those diameters the flame lacks the thermal mass to maintain joint temperature, so a larger tip or multi-flame head becomes necessary.

Highlights

  • Swirl flame wraps pipe evenly for faster joints
  • Quick-connect fitting snaps onto H-4 torch in seconds
  • Single-barrel tip handles 11 mm silver braze with MAP/Pro or propane
  • External lighter ignition gives instant flame control on site
  • 16 mm soft-solder capacity covers larger plumbing runs

Specifications

BrandTurbotorch
TypeNew

Questions about this item

What torch connection does the 11 mm swirl tip use?

The tip uses a Quick Connect fitting that matches the H-4 torch part number.

How do I light the tip after attaching it?

Connect the tip, open the fuel valve, then ignite the gas with an external lighter at the tip face.

When should I replace the tip?

Replace the tip when the swirl ports show erosion, the orifice is deformed, or flame pattern becomes uneven.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.