TurboTorch
TurboTorch 0386-0874 Soldering Brazing Tip 3/16 in Quick Connect
Soldering and brazing tip with swirl flame, quick-connect fitting and trigger-start ignition for 3/16 inch tip size
- TypeCutting Torches & Regulators
- Swirl flame pattern for even heat distribution
- Quick Connect fitting enables fast torch tip changes
- Trigger-start ignition lights the flame instantly
- Handles soft solder from 1/4 in up to 1 in
- Covers silver braze joints from 1/8 in to 1/2 in
TurboTorch 0386-0874 Soldering Brazing Tip
The TurboTorch 0386-0874 is a 3/16 in quick-connect tip designed for soldering and brazing applications. It suits plumbers, HVAC technicians and metalworkers who need a swirl flame for consistent heat distribution. The Extreme series tip handles soft solder from 1/4 in to 1 in and silver braze from 1/8 in to 1/2 in.
Quick Connect installation and common issues
The quick-connect fitting pushes onto compatible torches such as the G-4 or PLF-A5 models without tools. Ensure the connection seats fully to avoid fuel leaks at the rated 14 psig pressure. A loose fit or debris on the seal often causes unstable flame or ignition failure with the trigger-start system.
Compatibility checks before ordering
Verify your torch uses the quick-connect interface and matches the listed compatible part numbers G-4 or PLF-A5. Confirm the required fuel flow rate of 0.108 cmh is within your regulator capability. The tip size 3/16 in must suit your joint dimensions and the intended solder or braze alloy range.
Highlights
- Swirl flame pattern for even heat distribution
- Quick Connect fitting enables fast torch tip changes
- Trigger-start ignition lights the flame instantly
- Handles soft solder from 1/4 in up to 1 in
- Covers silver braze joints from 1/8 in to 1/2 in
Specifications
| Brand | TURBOTORCH |
|---|---|
| Type | Cutting Torches & Regulators |
Questions about this item
How can I verify the TurboTorch 0386-0874 tip is working correctly after attaching it to my torch?
After connecting the tip, ignite the trigger-start and observe a stable swirl flame; the fuel flow should measure 0.108 cmh at the rated 14 psig pressure.
What comes with the TurboTorch 0386-0874 tip and what must I supply separately?
The package contains the PL-3A Extreme series tip with quick-connect fitting; you must provide a compatible G-4 or PLF-A5 torch handle and fuel supply.
Which tip size should I choose for soft soldering up to 1 in and silver brazing up to 1/2 in?
The 3/16 in PL-3A tip covers soft solder from 1/4 in to 1 in and silver braze from 1/8 in to 1/2 in, matching those requirements.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00213107BTC
In stock